kudos.motorsports

Simon, The entire R33 range, excluding the GTR, use a push type clutch release mechanism. Below are photos of the both types of set-ups, push and pull. It is irrelevant whether the set-up you're looking at, is a single or multi plate, the pressure plate design will still closely resemble those pictured below. Push Type Pull Type The only reason your vehicle will have a pull type arrangement is if a gearbox conversion has be conducted using an R34 item. If you are in any doubt then it's an easy job to double check. It's a simple task, look on the drivers side of the gearbox and locate the clutch slave cylinder. If the piston is pointing towards the rear of the vehicle then you have a push set-up, if towards the front of the vehicle a pull. Below is a picture of an R32 GTS-t slave cylinder, your set-up will have two bolts holes on the same side of the slave not one on either side as in the picture. The piston is the silver rod in the lower left hand side of the image.

We have both the backing plates, and indicators in stock. They can be found on our website via the following link: http://www.kudosmotorsports.com/catalog/st...1_22_27_31.html

For all intensive purposes the R33 GTS25-t and R34 25GT-t boxes are extremely similar, your only concern is the difference in clutch release mechanisms. Because of this difference you have two options: Use the R34 pull set-up, and install either an R33 GTR or R34 GT25-t clutch (you current flywheel will except either) Convert the R34 box to use a push type clutch, this can be done by either of the following: Transfer your R33 set-up to the R34 box Exchange the R34 bellhousing/front plate for your R33 items While exchanging boxes it wouldn't be a bad idea to install a new clutch, even if for no other reason than peace of mind. Therefore assuming that the R34 box is coming with the release mechanism (including bearing and carrier), I would lean towards installing the R34 box as is. If you have any questions drop me a PM and I'll happily answer any questions you may have.

Ziller hit the nail on the head, unless you need a triple plate, no matter the price, it's just not worth the reduced driveabiltiy. However to answer your question it will physically fit your gearbox/engine however you will require a pull to push conversion kit. I personally would stick with the pull set-up, they are nicer to drive especially in a multi-plate clutch. However if you decide on the OS kit we keep genuine Nissan conversion kits on shelf so feel free to drop me a line. If you have any questions, or desire an Exedy clutch kit drop me a line. Andrew

I have a pair of second hand, factory orange, that I can do for $60 delivered.

I can offer you a pair of clear genuine Nissan items (as pictured below) for $209.00 + $13.20 Express Postage. If you are interested they can be found on our website by clicking the link below: http://www.kudosmotorsports.com/catalog/ni...clear-p-23.html

I had come to the same assumption, the single turbo picture was a give away. However I thought I'd still give myself a plug

The green label RB20/25 AMM do simply plug into the GTR wiring loom and the pin-outs are identical. If you are upgrading from the factory set-up you will need a new intake set-up, as these AMM are larger in diameter to the factory set-up. I personally find the best solution to this a A'PEXi super suction kit, which we sell for $770.00. This kits turns this upgrade into a simple bolt-on affair with only tuning required. If you are interested they can be found on our website via the following link: http://www.kudosmotorsports.com/catalog/ap...amms-p-479.html

We can offer you a set of rocker cover gaskets, inc 1/2 moons, for $93.50 + $9.90 Express Postage. They can be found on our website via the following link: http://www.kudosmotorsports.com/catalog/ni...twin-p-207.html

For a street driven vehicle, or even one that is lightly tracked, with under 250rwkw I couldn't recommend enough an Exedy Sports Organic kit. They are extremely capable unit and as they feature an organic clutch plate they retain much of the driveability of the factory set-up. We sell these kits for $579.70 + postage. This kit, and the full list of R32 GTR clutches we can offer, can be found within the following link: http://www.skylinesaustralia.com/forums/Ex...-G-t227523.html

We currently have a few sets of -7s in-stock, they are $2420.00 + postage. http://www.skylinesaustralia.com/forums/Ga...-1-t229588.html

If the sensor you require is similar to the 2-pin unit pictured below (head colour may be different) we sell them brand new for $89.10 + $9.90 Express Postage. If you are interested they can be found on our website by clicking here.

We currently have these on special for $275.00 + Postage (Staring from $13.20 for Express Post). If you are interested they can be found on our website here.

Steve, I have an Exedy Hyper Twin that required a rebuild. $500 delivered.

I have GT3076 kits as pictured below, PM sent.

Are you after a kit or just the turbo itself?

PM Sent.

I have a brand new Kakimoto Hyper N1+Rev that I can offer you for $950 delivered. This is well below cost, and the offer is first in best dressed.

We actually have an auction going on eBay for a set (your choice of clear or tinted) which is currently sitting at $61.00. It can be found within the following link: http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=220453443737

I can offer you a brand new vent for $99.00 + $9.90 Express Postage, if you are interested they can be found on our website here:

PM Sent.

I can help with either a complete Exedy kit or new clutch plate, if you are interested simply click the corresponding link below: Heavy Duty Button Clutch Plate (5 Puck) - $246.40 Sports Ceramic Clutch Plate (3 Puck) - $369.60 Or I can offer you any complete kits from the Exedy range click here.

I can help with a genuine Nissan blank key (pictured below) for $16.50ea + $9.90 for Express Postage (up to 5 keys can be sent for the same freight cost). If you are interested they can be purchased from our website here.

I can offer you a brand new, genuine Nissan, vent for $143.00 + $9.90 Express Postage. If you are interested simply click the link below: http://www.kudosmotorsports.com/catalog/ni...-grey-p-24.html These are in stock on the Gold Coast for immediate dispatch.

I have one that I would part with for $250 delivered, it is in as new condition and was removed only as an aftermarket ECU with launch control was installed.