Topaz

Hopefully mines done by then too. I think fuel prices are dropping too. too too too.

OOoooooo, 34GTR motor!!

I believe its stock, but was told by someone that theres a slight hole around there somewhere. $90 to remove it and weld a bit of pipe in. I spose if you have 1 muffler, a compliance check (if it gets yellowed anytime) should be fine.

The ball is rolling for a BCNR33 then Ant, well done for taking the first steps. I don't think I could bare seeing my baby being driven away by someone else either Is there spose to be a pic there or something?..... Tom

Unless you mean its capable of 800hp with the forgies.....with 800hp you can be assured that is has aftermarket steel wheeled turbos (huge twin high mounts), injectors and a fuel pump. With that much power it may even have a JUN 2.7L or HKS 2.8L stroker kit in it. 800hp is seriously modified.....why would you want to know if it can be pushed further

GTST's, yes. The R32 GTR was made up until September?? 1994. From August 1993 they were all V Spec....I don't know when V Spec II's kicked in though.

How do high flowed standard compare to N1 turbos?

An award I am ashamed to don

http://www.draganddrift.com/car.asp?id=145&UID=0 Seems a little excessive seen as though you could buy them new for $10k less than that. I don't think 623km ever is much of an insentive either. You could have a bombed out 34GTR for that money. I guess it must be the historical significance....

Has anyone removed the first muffler from their skylines exhaust system? Ive heard its legal because you only require 1 exhaust....

Heres the 2 side by side: Your tuner is right in saying N1 pumps don't flow as much as standard in normal driving conditions. If the revs are higher then the quantity of water pumping through the system is not bottlenecked as the standard one would be moreso.

Exactly what it says, grindeded my gears One of the bolts on the front mounted timing thingo has cut a groove in the cam gear To top it off my injectors are making the car run rich and idle all over the place and I don't think my belts are tightened up properly Now I have to wait until October 10th until Ken can fit me in for a retune sadface.

My dodgy install of cam gears and leaving the cam cover off. A bolt was tightened too much. LITERALLY GRINDS MY GEARS!!!!

Well, I'll tell you then I didn't drain all the fluid using the remove-the-exhaust method so there was some tap water in the system and I added approximately 6L more.

Good price. The guy I bought my 32GTR off wanted $26k, ended up paying $24k mid last year.....

Does anyone know the liquid capasity of the R32 GTR coolant system? When draining the 'brown shit' from my system most of it went on the floor so I couldn't get an accurate reading Cheers..

Bam! Me too, I'd ike to get this sticker kit as well. Including the bonnet sticker from the front left light.

Vovlo drivers, idiots are stereotyping themselves, I wonder what it looks like through the wind screen?! and do the blinkers make a noise at all? Do they realise that they have their indicator on?! Don't leave a gap you peenarse, people are c**nts, they will pull as far up the left as possible and then pull into the middle lane. You are just letting them in. No, don't hold your foot slightly on the brake so your lights are on bbut your still moving forward. Grrrrrrr

Gimme a break, first time out with low boost

I have a Nismo stikcer inside my fuel filler thing that states 'Premium Fuel Only', Dooood! +12kW .....Why are you all taking the piss out of this post

GTA:SA on PS2 9.6 out of 10 my arse.

Anything on the R32 carbon bonnet and boot lips? I have been after these for a while

I have one off my R32 GTR (prolly same as the gtst knob), can't picture the condition in my minds eye. Pics up tonight...

An N1 ECU came out of my 1993 GTR earlier this year. Some pics here: http://www.skylinesaustralia.com/forums/in...=111781&hl=

Also, I don't know the difference but the HKS ones are made of Duralumin and Nickel whereas the Tomei's are 100% Duralumin. EDIT: just did a quick search and Nickel is actually stronger than Duralumin on the 'Vickers Hardness' test. 638MPa compared with 450MPa respectively.