DrLui

Ive got a spare set of AR-X Bilstein shocks with King Springs. PM me if your interested

Did he have a spare key or was he hot wiring it all the time

That was kind of the

I might have seen your car over the weekend, it was about 12:30am Saturday night on Springvale Road at the Eastern Fwy overpass

Havnt seen it done, but i have seen a v35 front end conversion

Spotted a white M35 with NSW number plates leaving the V8's at Winton this arvo. Was good seeing another Stag amongst the Commodore and Falcon crowd

What is your budget?

After work today I decided to test further into the coils, as I have tested the resistance across them and everything seemed normal. Got the car warm after work (which is hard because I live 2 mins from work) and got it missing. Went through each individual coil pack unplugging it while the engine was running and listening for the miss. Got to the middle passenger side one and when I unplugged I didn't get the intermittant miss. Keeped checking the rest of the coils and every time I unplugged the could I would get the miss. So I swapped that coil and now it's running smooth. The pic shows slight damage to the old coil It's amazing how much that temporary miss would effect the feel of the car, but it's a much nicer car to drive now. Thanks everyone for their help

Hopefully its just that. I have a couple of spare coil packs, ill try and suss it out

I've checked for air leaks, and pulled the coils out to check them prior. I reckon it wont hurt to check them again, but if its the coils it doesn't explain why it works perfectly fine when its cold.

I did think that, I quickly swapped it over with my spare one at lunch and still no go

I'm having a slight intermittent misfire, not sure if you can hear it in the video bellow but it normally happens around 2500rpm when driving, at 21 seconds into the video you can hear the miss around 3000rpm. It only happens when the car is warm, when its cold it drives perfectly fine also after the car is warm it sometimes misses at idle as well. I have replaced the spark plugs, checked the coils and replaced the O2 sensor. I am not getting any error codes, and this was present before i did any mods to the motor (i.e electronic boost controller and BOV) Any help would be greatful

Parked next to this guy on Sunday at Winton TROLVO aka BIGZED

So last Thursday I got rid of my old Stagea shell. I know that there are still a lot of parts that are on the car but having it on the front lawn was just a terrible reminder of what happened. Also I no longer wanted a stripped out car on the front lawn. I still have a few parts but i no longer have the shell to pick parts from, here is a list of what i still have. Prices negotiable Factory Standard Radiator with thermo fan to suit intercooler $50 Rear Under Floor Compartment Tray $10 Front Black Heated Leather Seats $180 Factory optioned Aero Rear Bar $350 (Has a few marks on it) AR-X Bilstiens Shocks, with King Springs - $300 HDi Intercooler Kit, only was installed for a few months - (Pending)

PM Sent Sorry i don't have the gas struts for the rear tailgate Unfortunately last Thursday I got rid of the shell as it was a bit of a burden having it on the front lawn. I would of had the part as well, just bad timing. Sorry

Its all good, I have been a bit overly paranoid about leaving my car on the street as you could imagine. Yea the house and commission built those three town houses last year. Before that they were empty blocks for years. How long ago did you leave?

White M35 with ACT number plates causing up and down my street in Wangaratta. Anyone know who it could have been? As my previous Stagea was stolen from my front yard

Parts still available Feel free to PM me an offer ........... Front Leather Seats - $200 (See Pic Above) Standard Radiator, with thermo fan to clear intercooler - $80 (See Pic Above) Rear White Aero Bar, has a few marks - $400 (Pics To Come) AR-X Suspension, with king springs - $350 HDi Intercooler Kit, only was installed for a few months - $350 Grey Floor Mats - $100

Managed to fit my old bumper and bonnet in. Without having to remove the baby seat (baby wasnt in at the time)

Already sold

I was able to find these pics which helped wire it in yesterday arvo. It's all up and running now and ecu getting a good reading

I am wiring in my wideband o2 sensor and need to wire in the simulated narrowband signal to the ecu. Does anyone know what the wires on the end of the o2 sensor are> Refer to pic

PM sent