Fast31

redline is top stuff

are you still running an AFM, i have had a similar problem due to a faulty one and the other possibility could be a leaky injector

have any of you guys done any work to the rear camber on your R31 coupe mine is lowered a bit and squats too hard on launch losing traction too easily, due to massive negative camber I have heard of a modification to make the camber less

i was there in my Black r31 coupe, anyone get pics??

Hi i have a standard RB20 Turbo off a silver rocker RB20 of R32 vintage its in very good condition, no shaft play , comes with the dump pipe as well. $350 plus postage im in Sydney

the turbo usually runs out of puff after 5000 or so RPM. the cause is the size of the turbo itself. fitting a RB25 turbo or getting yours hi flowed will give you more top end power

DCIEVE: large front mount cooler 3 inch mandrel bent exhaust Haltech E6K, electronic boost control. Rb 25 turbocharger on 14psi. bosch motorsports fuel pump.

i pulled 187 last night with a Rb25 turbo and a Haltech

its programmed for the above mods, it comes with about 50cm of loom to splice into your original loom.

eccs version

looking for one of the above in the Sydney area so i can have a look before i buy. let me know please [email protected]

FS:Microtech MT8 computer, sequential fire version 2. Came off my RB 20, pulled it out to run a haltech ( to use antilag and data loging) Ran the car very well. made 160 rwkw on my Rb20 with a 3 inch exhaust, intercooler and 13psi boost. will also suit RB25's Asking $600 reply here or to [email protected]

ive got 227RWKW out of my RB20, heres how i done it. Haltech E6K. 2600 fitted and tuned 2nd hand T04, 1000 bucks 3 inch mandrel, 700. Front mount cooler, i used a truck core cost me nothin but say 2000 for a schmik one. Series 5 RX7 injectors 500, Bosch motorsports pump, 350 total $7150, if you had to add labour for the fitting of the turbo, pump and the injectors then $8000 would be getting close. Its not cheap but the Results are worth it

Hi I need a RB25 turbo charger ASAP. Im in Sydney and will come and get it straight away if you are in the Sydney area. please reply to [email protected]

if you can build me a RB 30 bottom end and RB25 head , for two grand and make more than 250 rwkw ill drop the cash over tomorrow

Clint32 How did you go about welding the wastegate to the standard manifold

i dyno'd my GTSx yesterday with the following mods 550x300x70 cooler microtech MT8 computer 3 inch mandrel bent exhaust 13psi made 161rwkw on the dyno. My old RB20 setup made 227rwkw, with a TO4 turbo, big injectors, big fuel pump, Haltech computer and 17psi. was very laggy, the turbo was'nt the best match for the motor, but when it come on boost, hang on tight. for a drag car it was sweet, but alittle too laggy for a streeter

with a standard Rb 25 turbo 200rwkw is starting to stretch things a little. i have seen RB25 turbo's usually add 15 to 20kw more than the standard RB20 turbo, both running the same boost.

i have Two Pioneer 10 inch subs, in a ported box. excellent condition, selling due to taking up too much boot space. PS: they are the ones with the checker plate finish on them. looking for $150 Im in Sydney due to the size of the package i would prefer pick up or meet you half way etc. Replies to [email protected]

pm sent

sorry, sold it today

i used scotch brite pads with autosol metal polish, then a soft cloth with autosol to finish off, if its bad you may have to use 600 grade wet or dry paper and work up to 1000 grade , then scotch brite then a cloth

Hi autometer Pro-comp Monster Tacho with shift light for sale excellent condition, model number 3904. with mounting bracket. $240 ono PS, this is not the cheap Autometer autogauge one on sale at the moment for $300 at most automotive stores. Im in Syd but will COD at your expense email me at [email protected] or reply here

they are a coupe mate, imported from Japan the Aussie delivered ones are 4 door There is a 4 door imported from japan, called a Passage, they have no pillar between the front and back door

roy mine is black over silver, standard turbo, microtech