darrinspencer

Mike the answer to your question Do Stagea need to be de-gassed? No Stagea's do not need to be re-gassed as they have R134A gas already Only cars coming in with the old R12 gas need to be de-gassed and re-gassed with R134a.

R33 manual brake pedal needed for a conversion If you got one, post a price Thanks

here is the thread http://www.skylinesaustralia.com/forums/in...topic=84373&hl= About $4500 plus fitting and painting

Chris Neale Wheel revolution 3209 2833 Slacks Creek

Try Hardcore at Moss st Slacks creek They were doing them polished on a exchange basis

Gtr gear box $500-1500 s/hand Clutch pedal, bracket and master cylinder $320 new braided clutch line $100 Clutch kit R32 push $450-500, R33 Pull $900 new Centre console new $1000 R33 hand brake s/hand $50 R33 brake pedal s/hand $30-50 New $90 Flywheel s/hand $50-100 Misc -oil etc $150 I think that's it Centre console is the killer

The clutch mounting bracket is similar to photo attached The photo is of a R33 bracket, which is diifferent to the Stagea

Just got back from Nissan and orderED some parts compltete Stagea clutch pedal with bolts, washers, rubber foot pad Part number 46540-0V700 $86 Stagea and R34 clucth master cylinder part number 30610-AA107 (use to be number 30610-AA120) $118 Stagea clutch pedal and clutch master cylinder mounting bracket Part number 46550-0V700 approx $115 Also confirmed by part numbers the R33 manual brake pedal is the same as the Stagea So will get one s/hand locally

Once my car is complied and on the road in the next couple of weeks, the following parts will come available over the next few months Series 2 full front bolt on panels, would suit front repair or series 1 front upgrade Bonnet $350, (sold to Alex) Guards Lh Rh $225 ea, (sold to Alex) bonnet hinges $60 pr, bonnet catch $40, part or all of radiator support $SOLD Factory Xenon head lights $SOLD Factory standard headlights suit compliance $500 pr(sold to Alex) Factory high beam driving lights $300 pr (sold to Alex) Factory front indicators in front bar $150 pr (sold to Alex) Ms factory front bar has some damage needs repair $275 NEW PRICE Front bar reo $(sold to Alex) Dolphin front grille $(sold to Ega4it) Factory Brakes front and rear calipers, disks, pads $300 (Sold to Mike) Factory wheels 16x7 inch and 70% snow tyres 205/55/16 $SOLD Factory series 2 exhaust complete with the 2 new cats for compliance rusty $75 Tipronic auto 4wd gearbox 105km $400 (Sold to Mike) Auto center console and other bits from manual conversion $POA Caster rods R33 gtr aswell $60 pair Rear top camber arms $60 pair KYB shocks and springs, not height adjustable $SOLD Volk GTC 18x8 +30 wheels no tyres $SOLD

These are pictures of a series 1 for comparsion

I bought this cluster to try and fit it to my series 1, but have since sold the car and have a series 2 instead now From what I can tell, the wiring is different between the series 1 and 2 for the auto gear selector So it would take a bit of playing around to get it to work on a series 1 I have attached photo's below of the series 2 cluster and series 1 for comparsion You will have to make your mind if this is possible Otherwise if your series 2 cluster is not working, you can buy this one Km reading 97,032 km It cost me approx $250 to get it from Japan I will take all offers

Well, I got the part yesterday and it is not the clutch pedal, but it was the bracket that the pedal and master cylinder bolts to It should be just a case of removing the foot brake bracket and bolting this new one in Will go to Nissan and try to get the clutch pedal now.

I ran a search on 1997 and got 4 listings, but 3 were 98-99 Still ring them all, as they may have the year listed wrong and also S1 runs from 1996-1998

Have you tried www.partslocator.com.au There are 4 wreckers listed with the parts you want

I would think the S1 and S2 would be different, as the head lights are, so the mounting points will not line up At this stage, I am not sure if I can just change the top part of the support. The masa kit photo only shows the top bit which is only approx $120-130? from nissan for a R34. Have you tried nissan for a price? Get on to Alex for some part numbers, that way you will know for sure Metro Nissan in Brisbane are pretty good for import parts, or you could order direct from www.japanparts.com It will be at least 2 months before I get to mine.

Would only need $2000 for a Power fc, fmic and bleed valve and you should see upto 220rwkw with that turbo What do you expect for $15k + ???

Brendan If you like the red ones What about a set of Bride http://www.bride-jp.com/kakudai/rec/d_e11bis.gif With the Bride's you can buy the matching materail to do the rear seats and door trims aswell

companies like Recaro and Bride make seat mounts to suit Stagea's Photo attached As mention before, Skyline rails suit but are lower than the Stagea ones which may suit you better Brendan if you want my head height These cost approx $250 each new or $125-160 s/hand Even SAAS make rails now for R32,R33 and Silvia for about $229 ea at Autobarn.

98 series 2 Silver Tipronic Arrives next week....finally! Has full M'sFactory bodykit with 260RS wing, KYB suspension, rear sturt brace Mods waiting in garage to go on once complied Masa R34 GTR front end, Either R34 GTR 18x9 wheels or Volk GTC 18x8, have not decided yet R33 GTR manual conversion, S/S split dump and cat, need to find a cat back R34 GTT front and rear brakes, adj castor rods and rear camber arms Factory manual centre gauges, S/S Stagea kick plates Front mount intercooler kit and Bosch fuel pump Blitz SBC IDiii and nismo clear front and side indicators Still to get Turbo, Poncams, Power FC, injectors, coilovers, seats, ganador mirrors, towbar

No there not I will be removing at least the top panel, if not the whole radiator support panel when I do the conversion and fitting a R34 panel

Sold

They are either SR 4, 5 or 6 Got offered a set of them in the blue trim for 2K out of a Evo 6 or 7

I have been speaking to Jake32 and he has R34 GTR seats in his 260RS. They bolt straight in as do R32 and R33 GTR seats. R34 GTT seats do not as the R34 GT 2WD has a different floor pan. Jake32 said that the GTR seats sit a bit too low. He did admit he is a bit short to see over the bonnet You can not just un-bolt the rails from any of the factory Nissan seats and re-use them on aftermarket seats You will need to use the Recaro/Bride rails to suit. I have noticed that the Stagea Recaro/bride rails sit higher than the R32, R33, R34 rails. Terminal hope this helps Gtr seats are one of the best factory seats for comfort and handling, I had a set before in my R32, but I am yet to see a set that have been re-covered that look any good. That is why I was leaning towards the Recaro.

Still 96... something I only drive it once a fortnight now, just do not need it anymore

Factory seats just don't cut it when it comes good side support I have sat in a series 2 260RS Autech