BigDatto

***CHECK LAST POST - ADDED 2x NOTEBOOK PC's*** Moving from Sydney to Nelson Bay on the 29th (yes it's a hard life) so some stuff has gotta go. Big, oldskool desk. 6' x 2 3/4'. 1" box section welded steel frame, reinforced. 1" solid timber top, drawers on either side, very heavy duty-would make an ideal workbench for your garage or workshop. Vacuum cleaner, Sanyo 1100 watt 'hotdog' style. Good for your workshop or garage also. 2x CRT VGA monitors, 1x samtron other LG, work fine 1x xbox v1.1, motherboard fried, good for parts reserved 4 Nath32 various computer hardware, CD-Roms, PCI cards etc. could be more, haven't gone thru the garages - stay tuned ECR33 std intercooler, works fine. reserved 4 Nath32 Panasonic Microwave oven, good size, does what a microwave oven should 6x Self inking stamps *NEW* in the biggest size you can buy. check the pics 1x Motorola phone battery*NEW* p/n AANN4010A not sure which phones it suits 1x Roll of Belden MilSpec 100ohm ultra low loss twinax. Used for ultra high speed networking. This is hands down THE best cable for DIY audio projects. perfectly balanced twisted pair w/ quad shield. Very expensive to buy IF you can find it Nokia 'Matrix' style phone. not sure of model# MadCatz Xbox steering wheel, tip top. 2 foot high pile of magazines, mostly motoring, lot of good tech stuff Mission/Cyrus M72 standmount loudpeakers GameBoy Pocket Sega Saturn Console PC/Multimedia speakers, good for PC/Ipod etc one set has subwoofer stainless exhaust tips vinyl motor trim Turd walkie talkies single din box Water-to-air intercooler (AVO) 2x VHS VCR's. one Akai Hi-Fi w/ long play & NTSC playback, 1x vintage (1987) JVC. Both are tip top. AKAI IS GONSKI ! ACHTUNG! all freebies are GONSKI. No more enquiries please. Thank you to everyone who helped, esp. Jason & Sam, and Bong for helping with the Garage. YOU ROCK !! As for all the l4m3r5 who stiffed me on unkept appointments, I can't tell you anything you don't hear every other day...unbelievable that I couldn't give stuff away. Any questions? [email protected] 0424 569772 ask for Wells.

sold pending payment...

Got some vintage hardware: Nokia 100 (the Fender Strat of mobile phones) circa 1995-1996 & a stylin' Voxson in-car unit circa 1990. Both work fine. Shame there's no network to support them

'Lo Folks, someone's gonna bag a bargain !! Item: HKS GT2530 Dual BB turbocharger, .64 A/R T25/T28 flange, 5 bolt discharge outlet. Universal style comp. in/out. With some tube bends can be adapted to practically any installation Location: Sydney Item Condition: As new, never fitted, see Extra Info Reason for Selling: Not required, have a GT2535 Price and Payment Conditions: $1300. Cash, bank deposit, buyer pays postage/courier. Sydney (Parramatta) buyer has priority. I would prefer a buyer to inspect first before committing to purchase. Extra Info: Remanufactured by GCG april 04, receipt for $795. New CHRA, balanced on a Schenk VSR, brand new turbine housing, never fitted since remanufacturing, assembled & balanced to better than Garrett tolerances. Turbo only, NO ancillaries. What you see in the pics is what you get. Contact Details: PM, email, or 0410424470. Please be aware I work awkward hours & can't field responses after 12pm & before 12am. Please ask rather than make any assumptions, I'd like this to be a good kharma experience!

Hi Adam, Pls check email. Ta.

Bump FFS. Anyone want $ome dollar$$$ ??

Shotgun on the M-spec & skirts ! :lol:

http://www.geocities.com/MotorCity/Speedwa...sbc_manual.html

Aftermarket wheel only champ. It's basically just a 2" long machined aluminium tube flanged & drilled at both ends to mate between boss & wheel. drilled for Momo & Sparco pattern both ends. Also the black flexi rubber tube that comes with aftermarket bosses slips over it perfectly. If you have/can find a spare one, no hassles from Mr Plod. http://www.sparcousa.com/psteering_acc.asp?id=380

Sparco steering spacer. $75 from Revolution Racegear. I find this gives much better control + heel & toe without knee-bashing.

Someonestolecc is spot on. The Blitz TwinSBC is real easy, & it just works. Button goes in...high boost. Button goes out...low boost. Homer Simpson could operate it. MrZac is selling one, snap it up. I'm wishing I hadn't sold mine to cc now !

Yes they are a direct fit. So are USDM Ver 5/6 STi injectors (a little easier to find, usually go for about $USD150 per set of four). The toyota "J" injectors are low impedance, so no good without a ballast resistor. Mazda FD3S primary & 20B injectors will fit with Sard type collars. So you indeed have some choices !

Awesome, please do stay in touch.

Hi xtx, I'll buy your Type-M front bar if it's in good nick. I'm sure it will help towards the cost of painting your new parts. Let me know champ.

Cool Boz, Keen. Custom intercooler work happening next week, so cut-out is OK. Where's your location ?

BUMP... bit of urgency here... any traders/wreckers can help out ?

not always...

I only mentioned this because they did open the parcel (in front of me) & said "WTF is this ?? (to use the parlance of our times). If I had let the parcel continue to the post office I'm sure it would have remained sealed. But xmas had come early & I couldn't wait !!

Naughty boy.. you shouldn't be driving on the street with that. Does your Mum know ??

I enquired about the Free Trade Agreement with customs officers at Clyde, they clarified that it only applies to goods manufactured in the USA, & there has been some confusion over this point. example A: goods mfg in USA, purchased from USA, no import duty example B: goods mfg in Canada, purchased from USA, 15% import duty example C: goods mfg in USA, purchased from Asia, 15% import duty Also there are concessions for certain vehicle parts, but i didn't get the lowdown on that. so... buyer beware !

It did come with a T25 flange/5 bolt outlet, so no good for RB's as a single, But I just happen to have an HKS T3 .64 turbine housing from a GT2530 so a 5 min job to swap it over. It's going on an RB25DET.

This is good news for RB25DET owners. the US spec 2.5L STi uses high impedance side feed 440cc injectors, that fit straight in our fuel rails. I'd expect we'll get the same.Ripper B) The chief reason for going 2.5L in the States was to meet CARB (California) emissions standards - the toughest in the world. They must be selling very well over there.

Well if you don't empty it it will dump its contents straight back into the compressor inlet, oil sludge accumulates in the intercooler core, drastically reducing its efficiency, then getting sucked into the motor, resulting in nasty tailpipe emissions & forming nasty carbon deposits in the combustion chamber all of which contributes to higher combustion chamber temps ultimately leading to increased pinging & shortened motor life. I would be removing ALL the pipework from the AFM to throttle body & giving it a thorough clean, paying particular attention to the intercooler, flushing it til the solvent runs clean, but before you do any of that... Empty the oil/air seperator now !

$1130 Australian dollars. total. No other hidden costs. I've seen online retailers here in oz flogging the same thing for $3638. Good luck to em.

Price of flywheel t/s ECR33 ? Weight of this item ? Ring gear included ? Thanks Chiba_Osaka