skyman

Short notice but I will be racing tomorrow with a couple mates so if any else is heading down come and say hi. I will be in my red r33... I'll be there early to beat the rush... Cheers Karl

I'll be there in a red r33 so be sure to come over and say hi, I'll be with a mate in a blue 350z too... Will be a great night as always Karl

Do you know which pin out the trigger is? I will try this on the weekend, this will run full volts to the pump though won't it? I'd still like to find the original problem any ideas on how to start?

Hi Guys Im getting an intermittent signal to my fuel pumps positive wire it just goes on and off when ever it feels like it?? I have checked the relay, fuse and changed fuel pumps all with no effect. I have tried re earthing the pumps negative which had no effect. Does the ecu give the the signal to the fuel pump? could the ecu be damaged? how do you check it? and if so what pin out is it? I am using a PFC and the car is an 94 r33 gtst. Any help would be great...

I have this exact same problem. Have you been able to figure out what was causing it???? any help would be great cheers

hey guys, I have 17" rims, intercooler piping and some other smaller parts the need to be sandblastered. Does any one know anyone or anywhere around the Rockingham/Mandurah area. cheers

hey guys after some opinions, should i get a new original sparco seat cover? or give the one section thats ripped a re-trim? does anyone know anyone who sell/repair them? cheers

hey guys, im looking for a housemate in Mandurah big block 4x2, double powered work shop out back plus heaps of room for other cars, house is alarmed anyone welcome but u must have a job fully furnished but need to have ur own bed rent is $125/week plus food and bills lease for 3-4 months with possibility for another 6 after. please call or leave msg cheers Karl- 043 011 7974

i couldnt wait till the weekend lol anyway the cas imput shaft ( half moon thing) looks like its snapped. does anyone know of the correct way to relpace the shaft or do i need a new cas??? and does the shaft come from the sensor or from the cam? thanks agian for the great help guys!!

cheers guys. ive had air flow meter problems before as well as intercooler pipes coming off, but the car has always started even without the airflow meter and with intercooler pipes blown off... ill check the cas this weekend but how would i know if its broken if its not cracked???

hi guys any help or ideas would be great. S1 r33 gtst, that has never missed a beat, a few days ago it started to violently backfire under any throttle. and once the car was turned off it wouldnt start again. it turns over fine but will backfire (one massive backfire) during it being turned over?? just put new plugs in still wont start i have PFC and AVCR all the sensors are working everything looks normal i also have 12 month old splitfire coils i have fuel pressure and fuel pump is working not sure wat else it could be??????

yer man ill be there i got a red 33 with black wheels... ill get there around 5 so hope to see ya there should be fun...................

gain, as in start duty? if so i have set 5th gear start values at -20% in order not to reach 1.8bar but it isnt stable and fluctuates btw .8 and 1.2.

ive set all of them at 2. ive heared that if i increase it will decreases stabitity because the solenoid will over correct it self? wat have u set urs at?

hey guys i just installed an avc-r to my r33. but im getting really high boost in 5th my boost settings at 51% duty and 1.30bar, all other gears are fine but in 5th it often reaches 1.8 under full load. to counter this i set the 5th gear duty down 20% in order to control, but its really unstable and fluctuates btw .8 and 1.2 bar? cheers

good night, freeway runs where awsome anyone got photos??

thats wat i thought but it was still happening with a brand new slave and master installed. my clutch squeeks as well.

hi guys heres the porblem 94 R33 gtst when my car is cold i have normal free play and pick up point through the clutch pedal... nothing strange, but as the car warms up the pick up point starts to move up, until there is absolutly no free play, ive had to adjust the pedal all the way out for it to work all. the clutch is a 5000k old puck exedy with chrome molly lighted flywheel. the strange thing is that if it starts to rain or i drive over standing water the clutch goes back to normal, free play comes back and the pick up point moves back to normal as if the cooling effect of the water somehow changes something, but once it stops raining problem comes back. i can still drive the car its just a big big pain in traffic or on up hill starts. i put in a brand new slave and master from nissan, bleed it from every bleed point many times. im pretty sure there are no air bubbles in the system. this problem did not happen with my old clutch. wat else can i try?????

i was in my red 33 with black rims and t-wind, i met up in mandurah, do u know if someone took any photos??

great cruz, enjoyed every leg, denis and i had some fun and we missed a turn off but no dramas, waiting for next one. anyone got photos??

im in see u guys there

nick033 We are located in Mandurah but if you have a garage we can come to you. Wat are you after? wat color is your car? Karl

hey guys, I am looking for 2 darkish skylines for feedback of our new glaze and swirl remover product specially designed for darker paints. If your paint is in a reasonable condition you will receive a full (package 3) paint restoration at half price. Package 3 will normally take me about 5-6hrs, so if you have the time jump in quick. Again here are our introduction offers: Package 1- wash with a paint cleanse and seal.. $120 recommended for relatively new or well maintained paints. Package 2- wash, paint cleanse polish and seal.. $180 recommended for well maintained paint that have lost their shine Package 3- wash, paint cleanse, light single stage clear coat cut, polish, seal and hand buff $350 recommended for paints that haven’t been looked after, lost their shine with only light swirl marks Package 4- wash, paint cleanse, 2 or 3 step clear coat cut, pre polish application, polish, hand buff, seal, hand buff and wash $550 recommended for paints that are neglected have lost their shine and have severe swirl marks... Thanks for support Luxury Vehicle Detailing Karl Wokulski 0430 117 974

ok guys thanks for your inquires. Its hard to give accurate prices because each car needs different products and different levels of detailing however here is a rough price guide: Package 1- wash with a paint cleanse and seal.. $120 recommended for relativley new or well maintained paints. Package 2- wash, paint cleanse polish and seal.. $180 recommended for well maintainted paint that have lost their shine Package 3- wash, paint cleanse, light single stage clear coat cut, polish, seal and hand buff $350 recommended for paints that havent been looked after, lost their shine with only light swirl marks Package 4- wash, paint cleanse, 2 or 3 step clear coat cut, pre polish application, poilsh, hand buff, seal, hand buff and wash $550 recommended for paints that are neglegted have lost their shine and have severe swirl marks... Prices are only rough. Package 4 will take me between 8-12hrs but the results are fantastic... I am based in Mandurah but will travel to you. Its important to book early as my schedule is filling up quickly. Please call me direct for any further inquires Regards Karl Wokulski 0430117974

hey guys I am in the process of starting my vehicle detailing business. I have been very successfully restoring the paint on my r33 and achieved great results on a few mates with 33s and an 32, as a result I would like to offer a range of paint restoration packages from a simple vehicle wash and seal though to a comprehensive 8 step detail. Due to our business not yet fully up and running prices are at their lowest as well as a 20% discount for sauwa members. We offer free quotes or free advice and a free demonstration of just how good your import paint can really look. Fully guaranteed, we use only the highest quality water based products made in WA for our harsh conditions. feel free to give me a call to discuss your needs cheers Karl Wokulski 0430 117 974