RB120WHY

I bent up some wire to what i needed and took it and the turbo to Extreme Motorsports in Northgate and got the right fittings and braid hose and screwed it all together. http://www.extrememotorsports.com.au/ If you can't do it yourself then try Pirtek, Enzed or mobile auto hoses http://www.mobileautohoses.com.au/ Cheers Steve

The chosen plug of champions. I have used these plugs in my RB20 and now have a set in my RB30/26

http://www.skylinesaustralia.com/forums/in...t&p=3858902 ^^^ It's a different brand and exceeds SFI regulations. A bargain to be had and is a pretty anodised red colour.

Item: Greddy clear timing gear cover suit RB26 HKS step 2 valve springs suit RB26 Atomic harmonic balancer suit RB30/26 Carbon fibre coil cover suit RB26 - has small scratch Age: All brand new - Not used in project Price: Timing gear cover $75 Valve springs $400 Balancer $500 Carbon cover $75 To Fit: Skyline Location: Northside Brisbane Contact: PM me or leave a msg in thread Comments: After building a RB30/26 for my car, plans changed along the way and these are left over unused parts. Cheers Steve

haha yeah, but i ran out of room

I don't know. I was just posting my experience with slightly smaller turbo and gate on smaller engine. I had a nasty home grown manifold slapped together. So i guess my info is not relevant.

I had a RB20 With 38mm gate with GT35r 0.63 rear and had no dramas from 10psi to 22psi.

Just a bit of custom work i'm really happy with

It's an Atomic brand. Exceeds Andra requirements which is all i am concerned about. It will be in the car by the end of the week. Damn full time work

Some pics of mine for your enjoyment

I'm using the Jun pump

These guys give me 1.54 60 foot times and are street legal, so they are my everyday tyres. Just be careful with skids as i have used a pair in 8 quarter mile passes showing off. They come in plenty of sizes too. More grip in the wet than my old street tyres because of the compound gripping, but as i dont run them on the front aquaplanning is not an issue. Available at Rocket Industries

Call my engine guy in my sig and tell him Steve with the Datsun 120y asked to help you with info. Don't talk too long tho as i will have to wait longer for mine to be finished then

His dyno may be "happy" and read high. Its only a figure, see how it drives. The seat of the pants is the best dyno, spend the money if it pulls harder than it was money well spent

Mine cost $500 for a mobile guy to come to my garage and do it on my old RB20. Saved me stuffing around with it. oil feed and the 2 water lines to the block were done.