dano4127

Finally got it tuned!!!! Feels really nice to drive Unfortunately maxed out the Z32 for some unknown reason so couldnt go any further as i only had 2 hours of tuning available on the dyno with DrDrift Just wondering if anyone can tell me what this works out to be in NM? Posted up the full setup and other graphs in the dyno thread: http://www.skylinesaustralia.com/forums/in...t&p=4082856

Rotorua Import Pro Shop (RIPS) - Stock internal Long motor, POWER FC Pro RIPS Plenum, Stock throttlebody Z32 AFM Blitz Pod Turbosmart T Piece controlling boost XR6 Turbo - GT3540 IW with the 1.06 rear Standard Flapper and actuator Custom Dump into Kakimoto JASMA Catback Boost Worx Stainless Highmount, Just Jap GTR Style 100mm Cooler 3" Cooler piping HKS Cam Gears (Not yet installed) Tial 50mm BOV 550cc Sard Injectors Bosch 044 and ARE Surge setup Maxed out the brand new Z32 @ 255kw which is disappointing but the car does feel really good Clutch needs to be upgraded again before i go any further anyway so once i get that sorted it will be more boost and more power FYI Car was tuned by Sam (DrDrift) and i have gotta say I would not hesitate to recommend him to anyone - Great tuner and a great guy I only had 2 hours of tuning with him if he had of had more time available we coulda started messing around with AFM's but I just said get it driving nice for me and i will sort it out for when he next does a QLD tour

Item: Rockford Fosgate 15" HX2 Subwoofer Age: 3 Years New haha Condition: As new Price: $260 ono Location: South Brisbane / Logan Contact: PM Comments: Purchased this with the intention of using it in my old wagon but never got around to it Details: Dual voice coil design CONsealer gasket hides mounting screws and provides an airtight seal Frequency response 24-200 Hz Power range 156-600 watts RMS (300 watts per voice coil) Peak power 1,200 watts Sensitivity 89 dB SPL Top mount depth 6-15/16" Sealed box volume 2.25-5.0 cubic feet Ported box volume 2.0-4.0 cubic feet

Item: Greddy Profec B Spec 2 - Black Age: 3 Months Condition: Great Price: $300 To Fit: (What car) What ever your heart desires Location: South Brisbane Contact: PM Comments: Based on the very popular B-Spec., the all new PRofec B-Spec. II's basic function to increase boost is as easy as the original, with an added built in boost pressure display and optional features like real-time, peak or last boost display (in either kPa or PSI). There are optional warning and boost limiter functions that can be programmed to offer much more control. The two presets values can be stored and are executed by a larger capacity inline solenoid valve. This unit does not require extensive programming and is ideal for low to high boost levels for single or twin turbos with actuator or external wastegates.

ok he did say buit motor...

sorry i clearly didnt read it properly I noticed head and main studs HKS gasket ect. and the huge shopping list thinking it was a built motor... didnt realise the shopping list was compiled of things like: HKS M45 spark plugs BF goodrich R1 tyres (Drag) After market air filter Ksport coil overs ssqbv HKS and products that are the best money can buy...

ask the person who built the motor?

whats one of these worth? could be used on an XR6 3540? You still running the standard flapper?

Top of the RB30 block sits 38mm higher than the RB25 one so effectively everything attached to the head is going to me 38mm higher than the stock position

Another vote for dan here

Poor Quality Stainless Steel High mount Manifolds will crack. Good quality Stainless ones are not as likely to crack if setup correctly. Steam pipe manifolds ie. ETM/6BOOST are preety much guaranteed not to crack and will probably flow alot better than any of the lowmount style manifolds

I think I need to go visit your accountant...

Definitely agree with Dan but im an alpine fan boy for the head units - cant go wrong with them! Chris Rogers is the way to go, get in contact with him! If it was me: 1 x multi media head unit Alpine goodness 1 x front speaker set with tweeters Focal K2 Power or save some money with: Jaycar - Precision Response Splits 1 x rear speaker set Dont Bother with rears spend your money else where 1 x mono block 1000wrms of goodness for $400! 2 x amp make that 1 of these: 100wrms per channel so you got 1 channel per speaker 2 x sub 15 or 12 inch Not sure what music you listen to but f**k 15's! 1 x good quality 12" like this: Image Dynamics IDQ12D4

happy birthday!!!!!!!!

Tomei Pon Cams with Tomei Cam gears for $802.65 + Delivery

Just wondering if im on the right track here EBC with gain control is probably more important for people running internal gate turbos? I have a GT35 with the IW currently running a Turbosmart Manual bleed now starting to think the EBC will be a worthy investment

nah I would think that would be well over $1000 to pull it all apart and start replacing pistons Honestly your best bet is going to be look for another engine and drop it in probably about the $1000 dollar mark complete Then sell all the good stuff from your current one should get $500 for the head alone Make the mechanic drop it in for free in return yo buy/find the replacement motor hopefully you could get out of it $500 out of pocket

That sucks dude! Cheapest option is to just buy another bottom end or complete motor slap it in there, I would only recommend doing that if you plan on keeping the car stock and will cost you less than $1000 If you plan on modding rebuild the current motor with forged pistons and new bearings - check out the trader section for some prices or click the link in my sig and get in contact Dan for pricing on parts But its at this point where you have to say how long is a piece of string? Good luck! PS where are you located?

Red stitching? How worn is the drivers seat?

What 26 parts you going to use? Pistons/Rods/Crank in the 25 Block?

It can be done GTRGeoff Runs a 26/30 in his R33 GTST using a RB25DET PFC.... Dude, Keep the head and either chuck it back on a 25 or build a 30

Get it checked out on the dyno, tune probably needs some work... other than that fuel leak?

Awesome well done!

airbrush job would set it off nicely!

f**k the group its too much paperwork! If anyone here wants some RP at that price send me a PM and I will sort ya out