tek_01

Yeh but i gotta have 20 posts before i can put a for sale thread damn this sucks might have to go to ebay

I have put alloys on my wifes car so these are the old wheels and tyres that came with the car Im pretty sure the pcd is 5 x 120mm but i could be wrong so i dont think they will fit a skyline but good for a trailer or just the 2 good condition tyres or hubcaps they are 2 x 205/65/15 bridgestone re92 approx 70-80% tread 2 x 205/65/15 bridgestone re92 approx 30% tread 4 x holden hubcaps on the standard black steel rims ONE RIM HAS A BUCKLE IN IT which looks like someone ran into the gutter and i wouldnt drive on this rim. Would be good just for the 2 decent tyres on them. even just for a thrash although i dont condone that sort of behavior Pickup from bankstown, no postage obvioulsy $30

4 people already pm'd me so consider it gone thanks fellas ill pm whoever has first dibs

Have a standard airbox on its own, with a filter may POSSIBLY have the duct that goes to the front as well but not too sure free pickup from bankstown coz id rather it go to someone than the garbage

bump

any offers on the hicas pump? air filter or dials?

Master cyl brace is sold pending payment also have for sale an apexi pod to suit r33 (assuming i havent thrown it out). it is a bit dirty and also some of the nuts that you screw into have come loose from the plastic so need a bit of araldite make an offer, not looking for much

tomorrow dude took one with mobile but for some reason cant send to email so cbf tonight

Hey fellas have a master cylinder brace suited for an R33. it has 2 bolts that screw into the strut tower (where there are 2 factory threaded holes there) and brace the master cylinder to prevent flexing of the firewall etc It has been painted just a quick coat of black so it didnt stand out on my car. $30 Also have a set of r33 gtst series 1 standard black dials. these are JUST THE DIALS, no needles, no moving parts etc. I got the 300km/h ones from the group buy a long time ago and now dont need these as i have sold my baby $15 R33 series 1 HICAS unit, not needed as i used a HICAS lock bar. The unit comes AS IS.. Not sure if it is working or not as i had the hicas light come on in my car so i just removed it instead of trying to find the problem $15 located in bankstown, will post if my prices arent reasonable let me know

SOLD, Please delete

Bump, Car still for sale 10K fellas pretty cheap May also consider trades as i need to buy my mrs a car Must be Auto, 4 cyl preferably but 6's considered Must have A/C let me know what you got cheers

DrewII, nothing has come through cheers

pretty stock interior, didn't molest my car too much

Price drop fellas, 10k but not less need to buy my wife a car

Selling my car as i have a company car and a baby on the way so its has to go. It has only been driven on weekends for the past 6 months Tyres are about 80% front and rear. Car has been modified tastefully keeping it stock looking to avoid any problems. 1993 Turbo, Manual First owner since imported in 2006 with 53000kms on the clock. Rego runs out March 2009. Also i think there is approx 2 more years warranty left from the dealer which i have never had to use. Serviced every 10,000kms with full synthetic oils and new oil filter. Some minor scuffs here and there but overall in excellent condition mechanically and body wise List of Mods R34 GTT Wheels Nismo oil cap Nismo radiator cap Nismo carbon fibre pillar garnishes Nismo leather gearknob and handbrake boot Nismo radius rods Nismo Front bar Nismo Smoked lens indicators Nismo fuel pressure regulator Nismo Short Shifter Slotted rotors front and rear with 600deg Brake pads (about 80% left im guessing) HSK Fuel cut defender Whiteline swaybars front and rear Whiteline pineapples set for all round performance HKS black face boost gauge in custom pod, very factory looking 300KM/H Speedo Genuine Skyline floormats Heavy duty clutch (could be twin plate) has some vibrations Platinum spark plugs changed 15000kms ago 600x300x75mm Front mount intercooler Brake master cylinder stopper Braided brake lines Hks Style BOV Kakimoto 3.5" complete exhaust system from turbo back Quality alarm system with extra keypad to enter code before car starts Series II rear spoiler Apexi Air filter in custom fibreglass airbox to keep it legal Manual boost controller Fusion 4 ch Amp powering 2 x 6" soundstream fronts and 6" fusion rears JVC MP3 Player Head Unit Car has run a 13.5 sec 1/4 mile and Dyno'd at 200RWKW. I have all receipts for any work done to the car and certificates to prove times/dyno 12,000 ono Located in South West Sydney I dont think you will find something like this for the price. Thanks for looking Con PM me for phone number Cheers

Here u go best to use copper grease as it has an 1100deg rating (nissan use this in their shim anti-squeal kit)where i used wheel bearing grease which has only about a 300 deg rating. might be hard to find tho as its not sold in supercheap last time i looked so mine stops until i give it a bit of hard breaking than it starts again but its coz i suspect that the grease melts and is not performing like it should, but as i said copper grease should do the trick

thats how my car was running when i took the BOV off and turned it on LOL so definately check for leaks in all piping such as vacuum and intercooler/intake side of things but as others have mentioned before try someone afm

At this point... so you will want more later on? easiest and most complete is a tomei/nismo kit which are approx $450 which would flow much more than 220kw, more like 300kw or so another easy one is walbro kit which comes with most parts and only costs less than $200 but wouldnt flow much more than 250kw Also a bosch 040 is about same price and flow as walbro but not sure on installation. bosch 044 flows much more but again not sure on install if i could do it again. Buy right from the start, nismo/tomei kit GTR pumps are good altho need some minor modding to fit in the cradles and also must consider the age of the fuel pump

the profile is the percentage of height compared to the width of the tyre So.. 275 / 40 = 110mm 275 / 30 = 82.5mm id say that is a fair difference BTW if your guards aren't rolled/lipped i think you will have troubles especially if lowered. 265 should be fine

+1 for the lock bar option. $70 from someone here but can be found everywhere, installed in half hour and ripped globe out of dash simple

Tyres are perfectly fine for my power level. I find it difficult to spin them up without absolutely thrashing my car. When they wear out it is a different story tho...

Thats the funniest thing i have seen (spoiler) hahah pretty good tho similar to J34 regarding SMIC vs FMIC. Big difference with front mount on the dyno

Thanks for the comments, all taken into account Yes i forgot to mention i do have a hicas lockbar. And you're probably right it is my driving style Re the brake squeal. Yes it is sorted enough for me to not worry about it. Greased up all the pins and shims, et voila noise is gone! although it does come back after the brakes heat up after some spirited driving but i am pretty sure it is because i used wheel bearing grease instead of copper grease (which i now have a hold of - 1100deg rating!) which, with the heat is melting the grease and it loses its greasing properties. Thats my half-assed theory anyhow. Thanks once again lads

OK brand new nankang ns2, 225 45 17 maybe 90% tread 40psi pressure all around normal driving but i guess it would be the same on circuit. it is evident in the rain the most havent really done it in the dry

hey all i got the whiteline front and rear swaybars from the group buy and also pineapples fitted in the 'all round performance' position, standard otherwise Just wondering sometimes when i go around a bend in the wet the front slides than the back comes around. I have the front on the softest setting and the rear is on either the stiffest or 2nd stiffest setting can i help this from happening or i have to practice better weight transfer??