dreadr31

so is it $95 for none members or is it just for sau and wrx members

Purpose of what i have a shed full of rb motors and borddom When i was freshing up a 25 i grab a 20 crank and rods for a looksys

Yer its a 25 with all rb20 cams, looms and all the running gear I looked at installing rb20 crank and rods in a 25 bottom end it seem to be the same stroke just bigger pistons in a 25

nice work i just orderd my kando t67 25g 10cm for 20/25 set up in my r32, trent talked me into it as well lol ill proply just put it on a home made steam pipe manafold and a ebay 50mm external gate, should do the job for $150

ow yer and i want to put it in a CA s13

just seeing if a s2 loom gear will work with a 25det rb25det s2 loom ecu with a s1 throttle body can it be dun, s2 has a 2 plug s1 has single stuff i got is a s1 motor no coil packs no ecu every thing else a full s2 loom pack with coils, cas, cam and so on but no throttle boddy and also a rb20det half loom and ecu any help to make a 25det work wold be sweet thanks

should beable to use a 31/r32 shifter set and just get a r33 ball bush from nissan $10

parts for sale eastern subs gt2871rs reson for sale to big for what i want it came with my car $300 1997 r33 rb25det s2 loom with coilpacks, cas,ecu im not 100% if every thing is there get what you see $400 iv never ran it got a long motor from a r33 4door manual only needed the motor s13 lca's GC $70each it is a cooool steering wheel $50 rb25det plenum $20 rb25det intake and crossover $30 rb30 afm $20 r31 lsd diff not sure condishion $50 r31 3.7 minispool diff $150 0400102360

let us know how the custom gtr box goes in to the s13 body yer so cheap to use a gtr box these day there like $700 with tail shaft so find a aloy welder couldent take more than 1hr to weld the hole $100 custom tailshaft $150 bang awesome gearbox

the best week end ever, i was out testing my new drift cow so much fun thrashing a pos hahahahaha

me and my mates use to always hang out up at the dandys but it seem to have alot of traffic and guys in blue these days the speed limet is a bit gay as well, most of are cars cant turn a corner at 60ks hahaha

yer cant get a permit hmmm the defek says not to be used on the road but is ur towing it on the road it should be ok yer hmmmm

dun a bit of a bit more resurch reading a few people have been pulled up road towing a blown up car and just had to shorten there rope so reg or unreg seems to be ok

yer but towing is towing but its in the section of how to move a unreg vehicle maybe in the road rules that u can road tow all cars with reg or with out

my mate says this my mate says that hahahaha if u resurch you can find stuff but not sure if i can do a defected http://www.vicroads.vic.gov.au/Home/Regist...eredVehicle.htm Tow behind a registered vehicle You can tow the unregistered vehicle behind a registered vehicle. Road Rules Victoria 1999 (no. 295) apply when towing. They are: you must safely control the towed vehicle (you can be on a probationary licence) the brakes on the towed vehicle must be working when you are using rope, chain or wire the maximum space between the vehicles is 4 metres (if either vehicle is a motor cycle, the maximum is 2.5 metres) you must display a flag (minimum 30cm square) attached to the rope, chain or wire.

yer looking at buying a car thinking of just road towing it to a RWC tester

thsnks i do like sound of after market cams but the price is a bit of a killer hahahahaha

it a r32 with a tdo6 and niztune useing the rb20 loom so the VCT is not needed but ill need to use the 20 cams to run the CAS and to remove the vvt

yer going to put silver top rb20 cams in my s2 rb25 is there any advantage off running them i think i remeber some where that they are the same not sure

nah it doesent slip in i would need to use the rb20 cam to fit the 20 CAS the 25 is like a full circle with a cut thru it the 20 is all the funky splines hahaha

yep its a hitachi what wires do i have to chang over

hitachi comes to mind, ill check t/m to confurm

ok im useing a rb20 loom whit the rb25, it a s2 rb25 so far i put the 20 inlet cam in with a adjustabale cam gear to remove the vvt advance to 6' now the CAS is a diffrent style than the rb20 but the same plug do i have to use a rb20 ext cam and CAS or can i just use the rb25 CAS any help would be awesome thanks ps. if there is any thing else i might need to know or advise would help as well thanks

i think u cant chip 33 ecu

where u located got some of that stuff in melb