racer98

ttt $2k shipped to AU for the set.

putting proof I am the owner of it

Nope, its best for all of us since it diminishes Nissan's parts power strangle at the parts counter . (JAYBEE) thanks for the pm waiting for your reply what you want to do >>>>>>>>>>>>>>>>>>>>>>>

Can't be to careful on this stuff. Figured as much. I'm happy it was left opened since someone got outed and a scam has been avoided. Amazing what people will put online sometimes. I was cutting him a deal for $2,000usd shipped to AU by post mail. yes, it was and yes they are ready to go . should any of you peoples have anyone looking also have this for sale for $48,000usd.

I reported the post where he said he is me "racer986jec" and fortunately one of my customers told me about this thread......................... i'd second the motion for the ban................. mod btw where is the other thread someone saying they are in japan with the same items pictured ?

yes, I am . Yes, you will nee to fabricate mounts since they are radial mount calipers unless you can get the spindles from an R35 and use some creative wielding for the mounts. Southern.California You will atleast need a minimum of an 18in rim such as a TE37 that does not have a ridge inside the rim, you will nee to work out the brake bias as well the brake master cyl you will be using on these but I might have an extra standard R35 GTR brake master later you can use off me ! Paypal & post mail only. e-mail me [email protected] and here is the auction. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...;category=33563 Im in USA (Southern California 91316)

wait a min here man I got an offer from you on ebay last night. What are you doing on here telling people you are me ? for any one else asking you will need a standard min 18in size using only a TE37 rim that has no bump/ridge inside of the rim............ here are some more pix of the calipers and they were off a crashed R35 I am almost finished parting out. here is what it will look like on a R32 using TE37's here is what the caliper mount should look like to use the R35 GTR rotors here are the actual calipers notice the back on one is scratched I got an e-mail from a good friend in Australia telling me about this thread

its just a bare frame no parts on it hit hard on (LHD) side have the Title for it and Damage is extensive to the pass side. color is black (located IN So.cal) will let buyer or my self arrange for shipping but if you have someone state side who can come and pick up would be best for me. (818)-481-5633 / [email protected]

I have a APEXI power FC and comander for $850usd shipped.

Just in case you need the parts #'s here are some I have parted out with. I know this is an old thread also here are the caliper dust boot part #'s Front caliper is a 6piston. Front 20.9716.01 F Rear is a 4 piston caliper. ® 20.9717.07 Dust boots PN # 20-4872-41 Front:(dia.) 20487244 = 36mm 20487243 = 34mm 20487241 = 30mm Rear: 20487243 = 34mm 20487241 = 30mm

already have 3 a part so far .

I have 2 Sc14 super chargers left. $350usd. + shipping.

Item: BRIDE Age: USED Condition: USED some have rips Price: can ship 2 for the price of 1 shipment. $499.99usd To Fit: (What car) Nissan Skyline / S13 /s14 / R32 etc Location: Los Angeles California (91316 Encino) Contact: K Comments:Some seats are new others have rips in them that are easy to fix. please advise where you need the items shipped to. E-mail : [email protected] Aim : r390sports1

Make: Nissan 180sx (silvia front end with nismo parts) Model: Sileighty Milage: 200,000 Km Transmission: 5speed-with new clutch from HKS Colour: Black / Black Location: USA, Los Angeles (Encino 91316) Complied? ---------------------- n/a RWC supplied? ----------------- n/a Currently registered? Race use title only Price: $14,000usd shipped to AU Contact: Karm / [email protected] Comments / Modifications: lots and lots of work done to it Images: When I got the car, it was a bit rough and then it got a lot of TLC from me. All of the dents removed, new paint. A/C works, Ex-manifold bots/studs replaced with new gaskets Lock bolts and studs. S15 Turbo manifold gaskets new / Turbo is a .80 so its not a T25 and it has a larger trim on the turbo compressor housing, oil and water feed lines are a upgraded Earls braded lines. Front Mount intercooler from a GTR and the BOV is from ARC. Stock Management, Custom piping and HKS air filter, Upgraded down pipe+80mm RS*R muffler. SR20 motor has 150psi compression on all of the cylinders; Clutch is new and is an aftermarket unit. New alternator Nismo LSD RPS 180sx seat digital climate control. Interior Rps13 180sx Seats perfect condition Digital climate control & the a/c works Replaced carpet Dash is 99% clean only 1 crack. Manual Boost controller Boost gauge Center console with working power folding mirrors Esparco 320mm steering wheel. Exterior New black paint RPS13 180sx sides and trim Nismo / Autec Silvia AERO front bumper Non projection head light with working Hi-beam Silvia Front body conversion and properly aligned by a body shop. Suspension (F) JIC 7.0 fronts with pillow mounts for camber. ® NISMO 7.0 (8 way adj coilivers + helper springs). Engine SR20DET Red top (150psi Compression). Turbo is an aftermarket version with a (.80) on the compressor housing. New exhaust manifold studs New S15 Metal ex-manifold gasket + flange & elbow gakets replaced. Turbo custom piping and new clamps and bolts. Front mount intercooler has custom mounts and support braces. Upgraded - Down pipe RS*R catback 80mm with 110mm tip. Fuel : Brand new walbro fuel pump and sending unit. Transmission Clutch - aftermarket New parts - Clutch /pitch fork / T/o baring. Clutch slave Nismo - LSD 4.08 Wheels Nismo LMGT2 brakes Nissan S15 Slivia k's 11in disc + 4-piston caliper Brake fluid replaced Registration: only can get a title for a race use vehicile from the DMV, and that is under the 11 digit vin. Sale info: $11,500.(firm)............ lots of work done to it. NO TRADES!!!!!!!!!!!!! Sell your junk 1st before contacting me. Shipping- can ship via transporter............ Video of the car------------- Video 1 http://www.youtube.com/watch?v=7Uz4_IdHHc4 Video 2 http://www.youtube.com/watch?v=KCRBoDwE59g Video 3 http://www.youtube.com/watch?v=mR_AMG2h85o http://www.youtube.com/watch?v=KuTapAA-__k photos of the car

pm me ..............

I have a couple of version to choose from , I have a nismo exedy one from a Rb26 motor but I need to know the exact measurements on the flywheel and splne count on the clutch disc.

have a couple SC14 Supercharges as well. Im not local. AOL IM R390sports1 or e-mail : [email protected]