slippylotion

Cheers. I just hope my research is correct Shouldn't be a prob, if anything like the guy from SPC Performance said, the bolt might just be a few mm long but it's not a problem. Better a little long than short. I'll PM everyone payment details Wednesday night.

Sweet

Not a problem.

See the bolt inside the red oval I marked, thats the M35 Stagea lower shocker mount bolt. Notice its not on that a/market arm, thats because they don't fit the M35 Stagea.

Ok guys, I have confirmed the correct kit for our M35 Stagea from SPC Performance themselves. The kit we need is this http://www.spcalignment.com/component/spc/?task=part_description&pid=72265&region=AsiAust&make=Nissan&model=370Z&year=2009+-+2011&from=AsiAustFrom&to=AsiAustTo This is a 90mm long bolt where as the V35 bolt is only 80mm long. I measured up a bolt in my M35 and its 87mm long. At this stage we have the following orders Myself x 2 sets Daleo x 2 sets Scotty nm35 x 2 sets Commsman x 2 sets The price per set of 2 bolts is $21 plus a split cost from the $50 postage from the US. This will be worked out when the orders are closed on this wednesday and I know the amount of kits to be ordered. There will then be a postage cost of around $10 for the guys outside of SA, this will be confirmed on a case by case bases or I can post them to one guy in each state and he can arrange to have you pick them up from him. This will again save a bit of postage for everyone. Again it will be priced dependant on how they are sent. So anyone else wanting the bolts will need to place their interest by wednesday and then I will PM people my bank details wednesday night, 16 Nov, to make make payment so it clears friday or monday to then place the order monday 21 Nov Cheers guys

PM Jetwreck aka Craig. He does great prices On them. If your in Adelaide I can fit it for $250 plus oil.

They M35 shocker mounts to that arm but I don't think it does on the V35. You won't have any where to mount the bottom of your shocker if you use the V35 arm. So I don't see that working.

What cambers arms did you order? M35 as far as I know, has a camber arm on its own, the g35/v35 arm doesn't fit the m35. The only camber arm I've found for the m35 is out of Japan for around $600 and these are only modified factory arms. This is why I'm going with the SPC bolts.

So any other takers on these? Placing the order before the end of the week. So far its: Myself x 2 sets Daleo x 2 sets Scotty nm35 x 2 sets The people interested I will PM bank details for payment in the next couple days. Cheers

Yep they all make a whistle sound when producing boost just like the RB's do. Looks nice and clean, enjoy.

Just finished pulling out the drivers front drive shaft so I can drop it off tomorrow and get a new inner boot fitted. Also pulled out both front upper arms to get the stock bushes pushed out so I can finally fit the offset bushes to them. Now Im about to start fitting the trans cooler, I like productive days!

About 5 hrs start to finish. Could do them on a Saturday morning at my mates workshop with his help.

They are Work XSA 2piece rims. Took 12 weeks from placing the order to make them and deliver from Japan. Been contemplating changing them ready

Where did you get it?

I want one

I'm up for installing it for you

Transgo shift kit install finished. Result = AWESOME

That blue belongs on A Ford TX3 or a Holden Gemini, not an M35!

Thats cheap. If I can get a local shop here to do it for that price I won't bother ripping it out myself then.

I wish I could undo what I just saw

All going to plan so far, just take your time and double check everything. It was good having a mate check every step with me. If you have GOOD mechanical skills it shouldn't be a problem to do yourself.

Yep on my mates hoist. Shift kit is all fitted, just ran out of time so will refit the valve body tomorrow and test drive.

Started fitting the Transgo shift kit to the M35 today. While the car was on the hoist I noticed the drivers side front drive shaft has split the inner boot. How much are people paying for the new boot and is it a DIY job to fit the boot?

Yep got that covered.

Yeah Im assuming its the part number I have listed. There is 2 part numbers that fit the G35. 1st is the same part number as Ive listed that also fits the 350Z and the 2nd part number also fits the 370Z, so I should have the correct part number in mind. I have seen some a/market brands make these with a captive washer at the head while others don't have this head washer captive. I can't see that it matters if they aren't captive as they them have them fitting with a D slot in the washer and bolt machined accordingly.