32_Dave

forgot to add there is a good conversions table here: CLICK

Hey guys, trying to do the maths to select the correct master cylinders. for clutch the master i have is a 5/8 and is paired with a standard slave 3/4. Im struggling to work out the correct size required / with or without a nismo slave. same for brakes front are currently using a BM44, now being a pedal box you need to remove the booster, so is it down a size or up? front brakes are 4pot r33 gtst items rear are r32 gtst 2 pot systems. there is also an inline hydraulic handbrake i need to calculate the correct master size for i gather you choose the same for the rear brakes. the pedal ratios available are: 5.29:1 5.44:1 5.61:1 5.75:1 Im terrible at maths and am struggling to work out the piston area, so i can convert to required PSI pressures. information on brakes. R33 GTST Master Cylinder diam (mm) 23.8 444.88mm² Front Caliper Piston(diam x qty) 40.4×4 = 5127.58mm² Front rotors (diam x thk) 296×30 Rear Caliper Piston(diam x qty) 38.18×2 = 2289.78mm² ratio FR = 2.239 Rear Rotors (diam x thk) 297×18 Total area 7417.36mm² Brake to master ratio 16.67 If anyone out there has the knowledge please help !!! tar

Item: 270kw + Turbo / Manifold Package Location: Brisbane Item Condition: Good, see more info for details Reason for Selling: Smaller Turbo / More response Price and Payment Conditions: $1800.00, would accept 6boost manifold (rb25) as part payment, pickup or post at buyers expense. Extra Info: - Rare HKS cast Low mount Manifold (rb25) - Garret GT3076r (blows tiny bit of oil, think oil seals or something to do with oil lines, it doesn't constantly blow but when you get up it then back off and blip it it blows little bit of oil, still makes power) - Braided turbo lines with banjo fittings. - Turbosmart UltraGate 32mm Wastegate with screamer pipe - Orange turbo beanie - dump pipe - sonic performance studs - non-genuine new manifold to head gasket. Had it tuned with a haltech running 355hp on 15psi. Pictures: serious buyers only

Item: 270kw + Turbo / Manifold Package Location: Brisbane Item Condition: Good, see more info for details Reason for Selling: Smaller Turbo / More response Price and Payment Conditions: $1800.00, would accept 6boost manifold (rb25) as part payment, pickup or post at buyers expense. Extra Info: - Rare HKS cast Low mount Manifold (rb25) - Garret GT3076r (blows tiny bit of oil, think oil seals or something to do with oil lines, it doesn't constantly blow but when you get up it then back off and blip it it blows little bit of oil, still makes power) - Braided turbo lines with banjo fittings. - Turbosmart UltraGate 32mm Wastegate with screamer pipe - Orange turbo beanie - dump pipe - sonic performance studs - non-genuine new manifold to head gasket. Had it tuned with a haltech running 355hp on 15psi. Pictures: serious buyers only

1. 2 x Vios III 2. Back FG 3. Black Material 4. Pick up Brisbane

Hey everyone. Chasing some D1 dmax or dmax style front fenders for r32 gtst and some dmax or dmax style rear overfenders. let me know what ya got. peace, dave

Hey everyone. Chasing some D1 dmax or dmax style front fenders for r32 gtst and some dmax or dmax style rear overfenders. let me know what ya got. peace, dave

hey guys. trying to calculate some new master cylinders, just need some information to fill the gaps. Currently have R33 Gtst brakes up front and R32 gtst stocks on rear. BM44 master cylinder for brakes is a 0.937in bore, does anyone know the stroke? and the Clutch Master 3/4 is 0.750in bore same again does anyone know the stroke? and whats the specifications on a stock rb25 slave cylinder compared to a nismo slave? future pedal ratio will be around 5:1 and im looking into removing the booster, i gotta work out the new sizes. here is some help full links. Fraction / Decimal Conversions Master Cylinder Selection

Item: Sparco Sprint V Location: Brisbane Item Condition: Very Very good. Price and Payment Conditions: $400 w. Rail to suit 32 could modify for s13 etc.. Extra Info: Mint condition as new, black in colour, COMES WITH RAIL !! Pictures: looks like so. Contact Details: 0420 855 181, PM or [email protected]

Item: Sparco Sprint V Location: Brisbane Item Condition: Very Very good. Price and Payment Conditions: $400 w. Rail to suit 32 could modify for s13 etc.. Extra Info: Mint condition as new, black in colour, COMES WITH RAIL !! Pictures: looks like so. Contact Details: 0420 855 181, PM or [email protected]

Item: R32 Whiteline Swaybar Location: Brisbane Item Condition: Very good Price and Payment Conditions: $200 Extra Info: Comes with all links and bushes Pictures: not atm, can if need be Contact Details: 0420 855 181, PM or [email protected]

Item: R32 Whiteline Swaybar Location: Brisbane Item Condition: Very good Price and Payment Conditions: $200 Extra Info: Comes with all links and bushes Pictures: not atm, can if need be Contact Details: 0420 855 181, PM or [email protected]

Item: Vertex Front Bar Location: Brisbane Item Condition: Very good Reason for Selling: GTR front bar Price and Payment Conditions: $150.00 Extra Info: painted black, very good condition for used FRP bar Pictures: genuine buyers only Contact Details: 0420855181, PM or [email protected]

Item: Vertex Front Bar Location: Brisbane Item Condition: Very good Reason for Selling: GTR front bar Price and Payment Conditions: $150.00 Extra Info: painted black, very good condition for used FRP bar Pictures: genuine buyers only Contact Details: 0420855181, PM or [email protected]

200 clams?

i've put that in the add man. a set of valve stem seals is also included, however highly doubt its them cause the oil seems to come from the turbo. thanks miso..

Item: 270kw + Rb25det Package, bolt in and drive away Location: Brisbane Item Condition: Excellent, see more info for details Reason for Selling: EOI Price and Payment Conditions: $6500.00 ono includes everything bellow. can include tail shaft suit r32 conversion for extra $300.00 Extra Info: - Rb25det block, blasted and re-painted 2k black - Re-assembled bottom end - Ported Head with Re-lapped valves and new valve seals - Greddy copy plenum (machined flat and port matched / de-bured) w. Q45 90mm TB - Denso Jeccs 555c Injectors - Rare HKS cast Low mount Manifold - Garret GT3076r with braided lines (blows tiny bit of oil, think oil seals or something to do with oil lines, it doesn't constantly blow but when you get up it then back off and blip it it blows little bit of oil, still makes power) - Turbosmart 32mm Wastegate and turbosmart BOV - Orange turbo beanie - Re-assembled with new gaskets and 100,000km service kit. - Comes with spare exhaust manifold gasket, rear main, cam seals, cover seals etc. - Rockercovers have AN fittings. - Head has an added drain at back of head, to the sump - NPC heavy duty lighten flywheel - Exedy HD 5puk Button clutch - oil relocation fitting. - $180.00 set of sparkplugs, cant remember the name. comes with Rb25det Gearbox, no ECU, Coilpacks or loom included Have it currently tuned with a haltech running 355hp all day everyday on 15psi. ADD ECU, coil packs and loom and make a lazy 270kw plus easy!!! Pictures: Contact: 0420855181 PM or [email protected]

Will also throw in my conversion plates to sit motor 30mm further back and 40mm lower if interested.

Item: 270kw + Rb25det Package, bolt in and drive away Location: Brisbane Item Condition: Excellent, see more info for details Reason for Selling: EOI Price and Payment Conditions: $6500.00 ono includes everything bellow. can include tail shaft suit r32 conversion for extra $300.00 Extra Info: - Rb25det block, blasted and re-painted 2k black - Re-assembled bottom end - Ported Head with Re-lapped valves and new valve seals - Greddy copy plenum (machined flat and port matched / de-bured) w. Q45 90mm TB - Denso Jeccs 555c Injectors - Rare HKS cast Low mount Manifold - Garret GT3076r with braided lines (blows tiny bit of oil, think oil seals or something to do with oil lines, it doesn't constantly blow but when you get up it then back off and blip it it blows little bit of oil, still makes power) - Turbosmart 32mm Wastegate and turbosmart BOV - Orange turbo beanie - Re-assembled with new gaskets and 100,000km service kit. - Comes with spare exhaust manifold gasket, rear main, cam seals, cover seals etc. - Rockercovers have AN fittings. - Head has an added drain at back of head, to the sump - NPC heavy duty lighten flywheel - Exedy HD 5puk Button clutch - oil relocation fitting. - $180.00 set of sparkplugs, cant remember the name. comes with Rb25det Gearbox, no ECU, Coilpacks or loom included Have it currently tuned with a haltech running 355hp all day everyday on 15psi. ADD ECU, coil packs and loom and make a lazy 270kw plus easy!!! Pictures: Contact: 0420855181 PM or [email protected]

Item: Cooling-Pro Alloy Radiator Location: Brisbane Item Condition: Good Reason for Selling: have PWRRRRRR Price and Payment Conditions: $250.00 Extra Info: - Drop-in Upgrade - Dual Core - 40mm - Retains Factory Radiator Shroud will throw in some silicone radiator hoses (which are orange) and a water temp sender adapter Pictures: looks like this, but used, with a few bent fins per usual. Contact Details: 0420 855 181 or PM or [email protected]

Item: Cooling-Pro Alloy Radiator Location: Brisbane Item Condition: Good Reason for Selling: have PWRRRRRR Price and Payment Conditions: $250.00 Extra Info: - Drop-in Upgrade - Dual Core - 40mm - Retains Factory Radiator Shroud will throw in some silicone radiator hoses (which are orange) and a water temp sender adapter Pictures: looks like this, but used, with a few bent fins per usual. Contact Details: 0420 855 181 or PM or [email protected]

Item: R32 Knuckles suit gtst Location: Brisbane Item Condition: Very Good Reason for Selling: Change of plans Price and Payment Conditions: $350.00 Extra Info: They are 5 stud knuckles with brand new bearings and Powered by Max super angle kit welded on. - Powered by Max Angle kit is valued at $250.00 - Weld them on might cost ya a $50 for a cash job - Brand new OEM bearings are $110.00 ea. so buy these !!! Pictures: looks like this Contact Details: 0420 855 181, PM or email [email protected]

Item: R32 Knuckles suit gtst Location: Brisbane Item Condition: Very Good Reason for Selling: Change of plans Price and Payment Conditions: $350.00 Extra Info: They are 5 stud knuckles with brand new bearings and Powered by Max super angle kit welded on. - Powered by Max Angle kit is valued at $250.00 - Weld them on might cost ya a $50 for a cash job - Brand new OEM bearings are $110.00 ea. so buy these !!! Pictures: looks like this Contact Details: 0420 855 181, PM or email [email protected]

whats shell like?

awesome coil overs, rate them highly.