cobrAA

I will need a lot today lol! thanks

So I tried to change it today. WASTED 3 HOURS OF MY TIMES. How the heck do you UNBOLT THOSE 3 BOLTS?? Is there a special tools? I can't do it with a tiny screwdriver because I don't have enought force. With a long screwdriver it just wont fit. And with a ratchet, I don't have enought space to ''wind up'' PLEASE HELP! My car is a BNR32

So well I broke the little cheap plastic thing when I was changing my light for LED on my cluster. So I ordered my cable from nissan. I searched a lot. and I learn that the cable is connected to the gearbox and pass throught the firewall. But euh.. does some have picture of where exactly it goes? and how do you disconnect it? Will I have to change the fluid after? Thanks

Actually, the idea to put a clear coat on it was more to protect the paint and make it easier to wash it. I did the left side of my car and it look pretty good and shinny. But the problem is that I use foam to apply the paint( because I found, after applying one coat, that the brush didn't work really well) so I can't put grease on my nissan logo. So Is it possible to sand it back to metal ?? I'm asking because I just read on page 5 ( I think or 4) that it take way too much time to sand it back to metal...

Okay. My gauge are working and they light up when they do the ''dance'' but after that. there's no light. So my + and - are fine. So I'm down to: Orange wire : Ignition Yellow wire: Illumination I saw an orange wire coming from the Cig ligther plug so i wired my ignition wire there. And then there was a yellow wire not too far away so I strapped my yellow to this one. It didn't work out. So I let my orange wire to the cig lighter plug but I put my yellow wire to my radio harness illumination wire. Didn't work . Anyone can help me out? what is the difference between those 2 wires? which one should be the wrong connected? ( I HAVE A R32 GTR)

I bought a Dupli-Color Caliper Kit in RED and I was wondering if I should use a clear coat after the job? Anyone know?

Can I just go to a hardware shop and buy a 3/4 -16unf bolt and fit it in my oil block adaptor?

I think STRI doesn't make a oil block adaptor for the RB26DETT. I gonna have to go custom.. Which brand fit, for sure, a RB26 ?

Hey guys, I bought a STRI Oil Block Adaptor for my GTR and choosed the OBA-M20 because it say it was good for Nissan but then a S13 owner told me he had to order M19. So, Am I good with M20 or I need M19 for a gtr ?

V-SPEC MANUAL PEDAL SET?? pLEASE PM.

Sorry about that mistake, I'm very new to car but still enjoy my bnr32 Thanks for the answer, I've learn something today!

Also, Do I need to know the temperature of my water before it goes in my intercooler or after it pass throught the intercooler?

Heyy! I just bought my set of gauges And I would like to know where I should install my Water Temp sensor. It look like the previous owner already had a sensor installed ( in yellow). But I was wondering if it's the good place where my water temp sensor should go? Thanks everyone!

is carnuba wax the best product to shine a black car?

For the common driving, which gauges should be moving often? ( I know boost will) But between oil/water temp and oil pressure, which one should be moving more often?( I guess it's oil pressure hen?)

^^^thanksfor the advice/information!

Wouldn't fuel pressure be more important if i'm running an OEM Fuel pump( the fuel pump is know to die if reving too high no?) over an Oil pressure?? Anyways, people told me to get an oil pressure but I don't really get why? can you explain me the danger of having a too high oil pressure? Thanks P.S: I'm getting these gauges because I might start lapping this summer, if not It will be in 2 years but anyways I prefer the look of STRI gauges than the triple OEM gauge.

I pm'ed you about the surround.

I will be ordering 4 STRI Gauges for my GTR and I was wondering if my set-up was good? I was thinking about: -Oil temp -Water Temp -OIl pressure -Boost + a Oil block adaptor Does it sound like a good combo?

I will get the 1157 24-leds bulb x4 for each cover( one in each cover)

I was thinking about buying a set of Tein SS Jap spec for my BNR32. Can i just buy the Coil-Over or I need a wheel aligment after? other suspension parts? I'm on a tight budget and I'm more into ''showcar'' than race. I daily-drive my car 95% of the times!( But I might start lapping next season) I'm currenctly running Spring which drop my car by like 1 inch and I would like my GTR lower than that.. Is there another cheaper alternative than buying a set of Coil-over to get a 2 inch drop? Thanks!

When Soundstream were made in USA, their amps was really good! Now, I must say, they are sh*t

I just want to change the bulb not the tail light. I changed my headlight with T10 and HID and I love it. I then changed my interior light ( cluster) with T10 white and I love it. So I thought changing my rear bulb would be good too.

That why I was wondering if I should go red or white but while I was browsing on ebay, a seller said to not use red led if the cover is red..

Should I go RED or White since the cover is already red?