grepin

Has 69000km on the clock and all else works fine. Asking $150. Contact Greg 0412075359 or PM.

Both Done 69000km when removed in perfect working order. Can include standard inlet plenum as well and maybe some other bits like piping to Intercooler and maybe even some injectors etc. Head asking $700 and for the turbo $550. Contact Greg 0412075359.

Not sure if I could be bothered dismantling dropped price to $25900.

Open to serious offers before I dismantle.

Any interest or offers.

I am more keen to sell with the Intercooler and the piping as it all matches. Otherwise you would need to make it up. The Q45 throttlebody matches the greddy plenum nicely. Also there is a trust type r blow off valve all matched in. What I would be prepared to let go together would be the Turbo with choice of .68 or .87 ar exh housing at $2000, dump $250, Q45 thrott body at $350 with cable, exh manifold $700 (quality that wont warp like cheap brands), intercooler with all piping to match ie no step ups for large throttle body and 100mm inlet pipe for turbo and recess for plumb back for BOV at $1500, injectors $500. If I start selling some bits off then other stuff becomes throw away. I would sudjest taking the Greddy plenum and BOV to complete the setup. So thats $5300 all up.

Dont know mate just does. Has a lot of extras supporting it. Plus probably running more boost than they do when rating them. You interested in the motor. Maybe you would like the turbo, manifold, intercooler, plenum, throttle body, dump. Will take standard intercooler setup to stock turbo as trade maybe.

More pics and up to date dyno added.

More pics and price drop to $13000. Up to date dyno pic added.

More up to date dyno added. Maybe if someone likes the car I could drop it to a 200rwkw motor and sell much cheaper.

Disregard I worked it out. Reply not new topic for the sale section. Delete this if required.

Can I get this posted in the for sale section. Tried twice but kept landing here.

Items: Front R32 GTR seats. Item Condition: Good condition. No holes one small mark hardly noticeable. Extra Info: Fit R33 Contact Details: PM or ring Greg 0412075359 Price and price conditions: $480 pick up.

Items: R32 Front GTR seats Item Condition: Reasonable would do with a clean. One small blemish on one seat. Extra Info: Currently fitted to R33 GTst. Contact Details: Contact by PM or phone Greg on 0412075359 Price and price conditions: After $480 firm.

http://www.skylinesaustralia.com/forums/in...howtopic=151839

Motor from this car available. http://www.skylinesaustralia.com/forums/in...howtopic=152854

Motor from this car on offer. Whole car is still for sale. Note no bits to be sold individually unless the head and bottom end goes. Prices here are what they cost myself not what I am after. Basically shows the value of the motor not including fitting. http://www.skylinesaustralia.com/forums/in...=151839&hl= If there are bits you dont need then I can remove. Still fitted to car for test or dyno run welcome. Stock Bottom end at market rate $1000. HKS ajustable Cam gears $300 Head work $3500 with GTR 256 cams and solid lifters etc. Killer if fitted to 3.0l bottom end. CAMS GTR 256 $1000 N1 Punp $150 CAM tensioners and bearings $350 Remote oil filter kit and cooler. $699 Custom catch can with braid to match threaded rocker cover. $412 New Apexi pod filter $125 Intercooler and piping $2500 Greddy plenum $1006 cheap Q45 Throttle to fit nice to plenum no adapters needed $400 Z32 airflow meter $150 3.5 inch exhaust from dump right through. $1500 HKS 2835 Pro S with two exh housing .68 ar and .87 ar $4000 Exh manifold custom made low mount $1450 SARD 550cc injectors $960 Trust type R BOV plumbed back to inlet $500 PFC computer $1500 PFC HC with ext cable for easy disconnect $395 OS Gicken twin plate clutch $1500 Light fly wheel $300 Many many hours of tuning. 300rwkw with cureent .68 ar exh housing 320rwkw with the larger one. Total cost to me for parts alone $24,247. For you $15000 as I could get near this if I sold bits off seperately. Price drop $13000. Great head set for big power bottom end down the track. All work done through Tilbrook Auto and Dyno here in Adelaide. Ask for Mark. Contact Greg 0412075359

Cool might be what I am after. Just decided to sell my Skyline and will probably pull out the 300 rwkw motor out to sell seperately and drop a stocker in. So that is a R34 engine I assume. Wonder how the loom would match up? Does it have the computer?

Do you have to show them the car? What new engine did you get. And if stock RB25 Det what is going rate.

Was it all working fine. So full running engine all manifolds,alternator,aircon, fuel rail, fuel reg.

Yeah certainly am. I have put the car up for sale here in the forums and dont really expect any buyers at $27000 although there is more than $35000 worth of bits alone. So next step would be to sell the motor as a whole package and or slowly sell the bits off. The main issue is that it has the head with GTR cams etc or the bits would come off and stock bits on. Would be a nice head on a 3.0L. Motor out and motor in would be easiest.

And if it has extras like exhaust/intercooler etc

Just wondering if I swap an engine is required legal wise. To get all the correct numbers etc on compliance plates and rego etc. Does it have to go through Regency?

How much are you after for the engine?

Time to step back to one car and need something to tow my boat as well as drive car. I have made the difficult decision to sell the Skyline I have owned for the last 7 years taking it up to the beast it is. Don't think you will buy a stockish car and keep it that way. Save the hassle and cost its all done here. I have included some cost as an indicator of what a bargain your getting and the effort that has gone in. Selling as is for now. If not it is to be stripped. Motor available seperately. http://www.skylinesaustralia.com/forums/in...howtopic=152854 Exterior Factory electric sunroof. Modified front bar with centre cut out. $400 Silins rear drift wing with brake light. $275 + paint Rolled rear guard lip. Carbon fiber vented bonnet. $600. Interior 300 km/h Nismo speedo. $600 Alpine front splits fitted professionally fit into the door. $400 Jaycar 6x9 rear speakers in custom shelf. $300 2x Alpine Amps Flex 2 90w $300 Sunguard tinted windows $200 Cyclops Paralyser P385 alarm $120 Apexi turbo timer that works with the alarm. $200 Power window trigger for alarm $200 Shift light. Boost guage Intake/Exhaust Apexi pod filter with cold air intake $125 Large intercooler with sparco core custom made with large oulet to match plenum. $2000 Greddy plenum $1000 Q45 throttle body $400 Z32 Airflow meter $150 3.5 inch dump and exhaust right through. $1400 Engine Custom blue painted rocker covers. Stock bottom end. HKS ajustable cam gears. Extensive head work: HKS valve springs $714, shims $237, gaskets $250, radius seats $400, reface head $158, Valve stems $660, porting $570, spring clearances $570, HKS GTR 256 cams $1000, runs solid lifters and is basically GTR head great for a 3.0l bottom end later. N1 water pump $150. Cam belt idler tensioners replaced as well $350 Custom oil cooler kit put together with bits from Autobahn + remote filter and braided lines $699 Custom catch can with braid lines. $412 Turbo Fuel and ECU HKS 2835 ProS 0.68 ar + .87 spare exh housing $4000 + extra housing. Custom low mount exh housing $1450 Sard 550cc injectors $960 Bosch 044 fuel pump $400 Trust Type R BOV plumbed back to inlet $500 PFC Computer $1500 PFC Hand Commander and ext cable. $400 PFC Boost controller $395 Drive Train 5 speed manual with shock proof oil OS Gicken twin plate clutch $1500 Suspension and Brakes Bilstein ajustable shocks with coil over springs Setup by manta for track/handling $1690 Camber and caster ajustments front and rear Various bushes replaced. Rear Hicass lock bar. $150 Whiteline front and rear sway bars. $300 Standard slotted front discs with race brakes pads all round. Braid legal brake lines $400 + brake booster strut brace Wheels and Tyres Work Emotion Cr Kai 18x8.5 and 9.5 bronze wheels with spare stickers $2200 Near new Yokohama tyres worth at least $1200. Well over $30,000 worth of parts alone not including labour and fittment. Asking $27,500 firm. Price Drop $25900 Possibly would look at a swap for XR6 Turbo sedan silver colour. If you dont want some bits as you have your own we can take that off the price. Contact Greg 0412075359 or post etc. Serious buyers only please no joy riders.