LBR33

Whats your AFM reading, and do you have stock injectors

Its surge when accelerating when the boost guage reads -1 to 5 odd psi normally

i get these two problems Either when you are accelerating with the accelerator held in one position (which would be surge). The car would then like to bounce back and forth and generally act silly. Or when you do a partial lift off the throttle when on boost (so all of a sudden all the compressed air can't get past the partially closed throttle body) and then it bounces around and acts stupid again. You'd have to have modded the stock bov and blocked the bypass for it to do this though. But the interesting thing is that i havent modified the stock bov at all or blocked it off Lee

I cleaned the bov but no change, im thinking i might need a aftermarket plumback bov but would it need to be tighter or looser spring. Lee

Hi guys, Iv been getting huge compressor surge under light and medium throttle when the boost guage reads positive boost -1 - 5 odd psi normally. My mods are as follows R33 gtst s1 auto running 11 psi fmic, safc, gcg s2 highflow, full zorst, stock bov iv been told it could be the stock bov (might need to get a aftermarket plumback one) or the throttle body is too small and i need a XF one or the computer needs to be replaced with a standalone unit and the compressor surge can be tuned out Any advice would be helpful thanks

So u havnt seen the 500hp turbo hayabusa then

At 215rwkw they will hold well when.

Are you willing to convert i am..............on a serious note how about placing a order for the 575m replacment that will be a stunning car guaranteed and you can get to the head of the list.

your power window motor is almost dead....time to replace it

Bump

is the radiator+fans able to blow the hot air out ar idle or is it just sitting underneath

Bump

Note the ZY printed on the housing just like the forum link

If you guys dont care about your cars and ignore nissans warnings then use optimax extreme but you will pay the price in the years to come

Ethanol is ethanol it will cause damage no matter how much is in the fuel

ZY Turbo hmmmm......... http://www.mx6.com/forums/showthread.php?t=110947

Hi Guys, Im after a plumback aftermarket BOV to suit r33gtst Thanks

Give "her" a call - 0401300350

Yep just get new springs far far safer.

I second that......male or female

Chopn da springz is sik bro me n da bro cut 3/4 of da springs in da vl and it looks da shit.......

I know gavin wood does good engine but he will rob u blind when it comes to price, there are many other people out there who do good engines at the right price. Have you considered putting a rb25 in.....

So whos actually going

Its been posted before torque doesnt mean much unless you are towing a caravan when u are draging the gtr.....but it would be good to see in real life tho

I find mothers plastic polish works well if used regularly