-Tom

Help!

Bump

Looking for Mongoose M80 in Melbourne, thanks

$300 Bump

Bump

Location would be sweet. I'll take the indicator if the top tabs are intact and you're in Melbourne.

There's a newish CF vinyl which you can find on ebay called 'Carbon Fiber 4D' and it looks fairly legit compared to the old textured CF vinyl. I bought a sample and was quite impressed.

Buuuuump

Absolute bargain for the front pipes alone; assuming they are equal length

Will they fit under 17s? Also I'm looking for a cheapie set that someone has lying around, not really keen on paying toooooo much!

My rotors are munted, looking to see if anyone has a decent brake upgrade before I go and buy new rotors. Running 17" rims with good clearance; so nothing monstrously huge. PM me, thankyou!

Pretty sure my syncros are screwed too. I put in Redline Lightweight Shockproof and it still grinds a little at first but once it's all warmed up it shifts fine. I just double clutch till it's up to temp.

Just had a quick look on TRS for you, if you're using D2S bulbs I'm not sure if you should be getting the 9006 relay or not since the H1/H3 relay is if you get H1 or H3 bulbs. Maybe start a chat with TRS and see what they say.

Hello, Selling a set of 4 KYB 'New SR Special' shocks with unknown (dark blue) springs to suit R32 GTR. Nice and straight, no squeaks or rattles from them. Non-adjustable. I'd say they're probably 10/8 if not 12/10 springs. Selling because I've upgraded. Car sat at this height with them (above 100mm): Located in Eastern suburbs of Melb Looking for $450 nego PM me

Massive bump but just did this today. Thanks for the tip! Door closes with a much more solid thud now!

Many nuts busted..last night, before sleep. And the long spanner worked! And also probably because I loosened it.....with my SCA tools yesterday Thankyou SAU Edit: I would also recommend BMC brake stopper to anyone with shitty feeling brake pedal. It helps a bit.

I think it might be the cheapie set of ring spanners I have. They bend a bit. Just gonna take it to a mates place. He has a long ass 17mm spanner that might work.

Ring spanner + hammer + heat didn't work. Nut splitter up next?

Trying to take two of these 17mm nuts off to install a BMC stopper. Soaked it in WD40, hammered it with a spanner. Used an adjustable spanner with a bit more leverage and now it's just rounding it off slowly. What's next?

Yeah looks like I'm going to have to. Was just seeing if anyone had some lying around!

Bump

As above. PM me. Cheers

Yeah it does change, but no real issues with my AWD so I don't worry about it too much!

This is mine when it's primed. The liquid goes up about 2-3cm when the car's off though. I've always seen air pockets in all reservoirs as well, so you're not wrong.

Bump