Philr32

Thinner spacers if you can't completely ditch them? If not camber arms, $200-$300 will get u a decent set to do the job

His guards are already rolled

Ditch the spacer, or you can go camber arms and add some negative camber (doesnt look like ur running much camber at all), just depends how much camber would be required, looks like 2.5-3 degrees may do the trick and isn't too crazy? Or lastly the most expensive option of thinner rims. My advice is ditch the spacers if possible (or get thinner spacers)

Hi, I recently put in adjustable camber arms in the rear of my R32. I now have adjustable camber arms on the rear, adjustable caster on the front and height adjustable tein super street coilovers all round. I'm getting adjustable front camber arms also but not for some months and rims are standard 32 GTST items if it makes a difference. Anyways I have a 2 part question. 1. What are some good alignment settings for drifting keeping in mind it is also a street car on weekends and I have no camber adjustment on the front. 2. Where's a good place between parramatta and penrith to get a wheel alignment that won't cost more than $100 (pedders want $250)? Including camber (some places don't like touching camber strangely enough) I hope this is clear, sorry if its a little confusing

Bushes SOLD!

Bump, price drop $500 Also have standard camber/upper control arms for R32, 300zx etc looking for $50ish and also have standard R32 GTST rear wing in standard gunmetal grey colour looking for $50ish too.

Awesome I'm gonna try the bleeding the water/coolant too, didn't know there was the bleed valve near the plenum lol, I'm also gonna run the heater. Maybe a dumb question but does autobarn or supercheap sell nissan LLC? Or am I gonna have to go to nissan?

Bump want these gone, make an offer!

AUVIS is a blue slip place

Thanks everyone. I've noticed it's been "using" water (I fill up the water then after a while of driving I notice the temp goes up and check the radiator and it's quite low, it's happened twice now, first time I thought I didn't fill it up enough and there was air bubbles). I can't see any leeks anywhere even when it's hot. At first I thought because it was only water not coolant it was evaporating once hot (maybe out of the radiator cap as it was hissing when the car gets hot) but that's not even possible is it? Any ideas on what it could be?

So looking at putting coolant my skyline because it getting hot when using only water (coolant leaked then I replaced it with water, hence the heating issue, as there was no issues before when I was running coolant). Can someone recommend a coolant they have used or a coolant you would advise NOT to use. I have heard organic coolant is good, you basically buy a small bottle then add it to the water in your radiator, anyone used this? I believe it's similar but a bit different to antifreeze/antiboil. Any ideas suggestion advice etc is appreciated, cheers!

Willing to swap for a set of any GTR rims with tyres. Want them gone ASAP make offers!

If you are replacing most or all you're suspension arms then the new ones have new bushes that will last a while. Nolathane also sell "enhancement kits" which are basically all the nolathane bushes you need, they come in front or rear, some bushes need to be pressed in and out. Usually rear subframe bushes are shot, they are a pain to replace so most people get the metal subframe collar kit which stiffens it right up and they are cheap and super easy to install. I actually happen to have a nolathane rear bush kit for sale, if you wanna save yourself some $$$ PM me

Sorry western Sydney, rooty hill to be precise.

Bump still up for sale, willing to pull tyres off for interstate buyers, but you will need to organise own courier. PRICE DROP to $700 if gone before the weekend!

Also have standard rear upper camber/control arms for R32 GTST, good condition asking $50 pp.

I have my nolathane rear bush kit for sale, it's a complete rear kit for R32 GTST (maybe GTR too but not sure). Replaces all rear bushes except subframe bushes. Cost about $280 plus postage brand new. Asking $200 plus postage, not negotiable. Reply, inbox or call/SMS 0428112012. Cheers, phil

Price on R32 front upper camber arms incl postage to 2766?

Got a guy coming to look at them tonight or tomorrow, will let you know how it goes

I should also note the rims are located in western sydney

Yea I'm running them on my 32 GTST now, if your car is fairly low u will need camber and/or guard work on the rear. Fronts no issue at all

18x8.5 and 18x9.5 and +38 offset all round . Good amount of dish on the back. Wheels are structurally excellent but have a bit of gutter rash and some scratches as you would expect. Centres are painted matte black and look fairly good. A clean and polish would help alot. Current tyres are barely legal at best and would need replacing within 500-1000kms I'd say, but you be the judge. PCD is 5x114.3. Asking $799 negotiable. pics will be up soon. Call or sms Phil on 0428112012 for info or pics

Hi all, I've just replaced all the exhaust studs and manifold studs on my rb25det. My question is when I'm bolting the turbo back on is there anything special I need to know? Especially seeing as it lost some coolant and oil (which I will top up) but will there be air in the lines that I need to bleed to get out or something? If so just let it run for a bit with radiator and oil caps off and it will just come out? And is there any other special process or anything, or is it just bolt up reverse to taking it off? Thanks in advance

Cheers, will continue investigating