nizmokid

any red ones done????

yep JDM can get them as I am waiting on a set for my GTC volks......but they are on back order at the moment as volk is out of stock, as I was told. can't wait and JDM is a great friendly company and will use again if I need wheels for another car of mine!

well I have bought a set of gtc volks for my skyline off JDM and they have arrived into australia this week and I should have themto me in about 4-5 days......can't wait. very good trader.

I had the same problem with my turbo up grade, when the car is started it will idel fine but after a few revs it hunt idel and stall. so to fix this I need to plumb back my BOV and make sure the spring wasn't to hard set. fixed the problem but need to update the ecu from standard now as the safc2 is as far as I can go with it. Pulling 230rwkw on standard injectors and 12psi. need the powerFC and 555cc injectors to get bigger power!!!!

well I have done the my dash, because the rubber coating over the the plastic started to come off! and it look like crap. So I remover the dash parts and used thinners on the rubber (just a little on a rag) and that will breakdown the rubber and it can be scratched off with your fingernails. Sanding would take forever and as it is rubber clogs up the paper. when removed all the rubber wax and grease reomve it and give it a light sand. use plastic primer before painting it the color you desire. I sprayed mine in a silver, give it a few coats of colour and then load up the clear coats. a light cut and polish when dry and will look a million bucks!

I second that!

Iam 6'3 and I haven't had any problems with driving, but put racing seats into the car and as the floor pan isn't totaly flat. The seat sits a little higher that the standard ones now, and they are nice fitting race seat, I can see a little bit more of the road but my legs have come closer to the stearing wheel but still no problems!

i had to replumb my rs BOV back into the car as it had idle issues with the lager turbo.

get a GTR BOV or a greddy RS one they work well plumbed back!

make sure you remove all that rubber coating on the dash inserts before spraying, if that is what you are doing?

i can get nismo car mats front and rear custom made!

same as what he said!!!!!......colars included!

HKS europe I think has it !!!!!!!

can you fit "19" on a GTST R33? .......well can you with out the wheels scraping or rubbing when on full lock????

super cheap sell them! all sizes!!!...cheap as chips!

anyone got some better Pic's of these mags on a R33 or R32 skyline?????....and anymore info on these mags would be awsome!

good to hear mate, always good when it doen't cost anything to fix!

cheers guys!....didn't think ROH made very many nice mags!

your joking right!

I have a larger garett BB turbo from GCG Rated at 450hp and I am only running a standard computer with safc2 and it runs like a train...dynoed it and got 230rwkw......but next mods are new ECU & larger 555cc injectors! want to go the PFC but might go a MAP style ECU and ditch the airflow meters! but not bad from a stock computer with a piggyback!....my injector are at 85%....not upping it anymore!

what brand of mag are these guys???? and does your skyline have a set??? need some better pics of these wheels?

just yank at it the clips are behind the pillar cover, need some force to remove it but it will come!

Sard injectors are cheap, but still have to buy the collars to support them in your car and they are around $250 mark so in the end the the nismo injects would cost the same and have less hassles to bolt into the car!....I will be ordering HKS or nismo injectors around the 550cc size!

cheers!

did a search ...coundn't find much of this forum....!...or I am just lazy!