Jump to content
SAU Community

Recommended Posts

If you can built electronics i would consider the Jaycar electronic boost controller. For <$200 you have a great boost controller.

Just a little more fiddlier to setup however, once its set how often do you really fiddle with the boost settings.

It has two boost maps that are switchable as well.

The Power FC is not a electronic boost controller (EBC) - it's a total replacement ECU.

However you can get the EBC add-on for the Power FC. Buying the PFC (including EBC addon) and tuning it will leave you little change from $1500.

The e-boost is a dedicated EBC but frankly I'd rather get a JDM one (eg GReddy Profec B-Spec 2, Blitz D-SBC, Apexi AVC-R). These range in price from $450 - $1000.

Budgeting $2000 for an EBC is too much.

I've got an AVCR loving it. Pretty much has 3 stages, off, A & B so its handy, plus holds boost well and gives good readouts as well as functionality.

As one of the other guys pointed out PFC is not boost controller, its total computer that you can buy a boost contoller attachment for if you want.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...