Jump to content
SAU Community

Recommended Posts

60ft = 1.804 sec

ET = 13.033 sec

MPH = 104.4

Clutch was struggling... Launched at 3500rpm, anything more and clutch would slip..

Want to upgrade clutch so that I can get it into 12's..

Cheers

Rob.

ps. Have to post video soon..

Link to comment
https://www.sau.com.au/forums/topic/100648-took-the-s4-to-wsid/
Share on other sites

Thanks,

Not much, just chip and cat back exhaust..

Is it a current model RS6?

Can I ask why it is off the road? (any mods?)

Benm,

You used to own an gts-t right?? I think I remember you at the dyno day we went to when I had a silver skyline.

Cheers

Rob

Dude, I'm not too sure your air intakes are big enough... :) Lookout, roadkill!!!

IIRC, the S4 has twin intercoolers, right? One on each side so each turbo's charge is cooled seperately? The car looks awesome with the air intakes opened up like that! What did you do with the spotties, though?

My old man has a 1.8T in the slightly darker silver (Agate Grey, I think it's called) - as much as I tried he wouldn't sign for the Quattro/6spd, but it's a nice car none-the-less, if a little stiffly-sprung.

Good luck with the future mods and quicker times - a fresh clutch should work wonders.

GTR32X,

Thanks mate

NissanFreak,

mmm 331kw's of goodness :P

benm,

Changed, prefer 4wd?? Any mods planned??

Moanie,

Ahh thought that was you, you walked past me and I thoguth you looked familiar..

I was introduced to you like 3 yrs ago. (silver gts-t with turbo upgrade right??)

Did you have a go?? what did u get?

Cheers

Rob

Moanie,

Ahh thought that was you, you walked past me and I thoguth you looked familiar..

I was introduced to you like 3 yrs ago. (silver gts-t with turbo upgrade right??)

Did you have a go?? what did u get?

Cheers

Rob

hahaha... yeah thats me!!! are you serious??? where? what were you driving then?!

nah... didn't have a go! car needs a few things fixed! will be out there in the next few weeks!! when you heading back?!

haha

Can't remember now..

But I was driving the same car as u :)

robsr33atmitta23ue.th.jpg

I'm thinking of going to Oran/Wakefield next, want to test my semi-slicks out.. I don't go to WSID often, infact it's the 2nd time I have been there.

Talk soon

Rob

Ps. Let me know how u go :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
×
×
  • Create New...