Jump to content
SAU Community

Recommended Posts

Make sure you get the correct model number coils as the Series 1 and Series 2 R33 GTS-t's use different coils.

Ok, I sent an e-mail to them, Also pm'd ya Croat.

the funny thing is, even tho the car's not running right, the pleb's in there V6 commo still try and run it! with no hope!!!

thanks for the info fellas

From memory JustJap charge about $70 per/coil. If it's just 1 then that might be ok for you but if it is 3 or 4 that are faulty then it would probably be better to get a Splitfire set from www.nengun.com for about $550 delivered.

I've also got a second hand set for a series II R33. PM me if you're interested.

You might have to wait a while to get them from Nengun though...my last order arrived 6 weeks after I placed it, but if you're in no rush then you'll save a heap over local prices for Splitfire coils.

Thanks for that fellas

I have sent e-mails to nengen, but I found this web site and they came up with some cheap prices http://www.perfectrun.com.au/

so we will see, yeah I'm not going to chuck in second hand coils as they would have only done the same work as the ones that are in the car, so I will install a new set...

I've also got a second hand set for a series II R33. PM me if you're interested.

You might have to wait a while to get them from Nengun though...my last order arrived 6 weeks after I placed it, but if you're in no rush then you'll save a heap over local prices for Splitfire coils.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...