Jump to content
SAU Community

Recommended Posts

ozposter.jpg

Well 2006 has come and were gonna start it off with style, this is gonna be one the the biggest OzCruize events EVER.

The days plan will be printed out on maps and handed out for a gold coin donation also 2 meet points have been made so that you can choose which one is closer and easier for you to get to.

These are the details as follows:

DATE: Saturday 18th Febuary 2006

MEET POINT 1:

Stanford Hotel (Cnr Wellington Rd & Stud Rd)

Meet at 12pm leave at 1pm sharp

MEET POINT 2:

BP/Maccaz/Red Rooster Complex (Cnr Thompsons Rd & Western Port Hwy)

Meet at 1.30pm leave at 2pm Sharp!

WHATS PLANNED:

Beach cruise aswell as doing Arthurs Seat.

--------------------------------------------------------------------------------------------------------------------

MEET POINT 1: Stanford Hotel (Cnr Wellington Rd & Stud Rd)

2006150947_Stanford.JPG

MEET POINT 2: BP/Maccaz/Red Rooster Complex (Thompsons Rd and Western Port Hwy)

20061502755_Servo.JPG

All cars Welcome

Strictly mature Driver's only and by this we mean, these tips and Guidelines

http://www.ozcruize.com/forum/topic.asp?TOPIC_ID=1053

And also when entering and leaving the meet point please do so in a slow pace :)

Ok what to bring...? Gold coin donation to cover map costs, a full tank of petrol, a CB Radio if you have one, a bit of extra spending money as we will be stopping off at a swiss ice-cream shop and some fish & Chips for dinner for those who are hungry, also polish up your rides as we will be going to a special location for a small photoshoot.

Hope to see all of you's there and many new faces.

Cheers

Maciek thumbsup.gif

DIRECT LINK TO FORUM!

http://www.ozcruize.com/forum/topic.asp?TOPIC_ID=1767

Edited by CHUUBZ
Link to comment
https://www.sau.com.au/forums/topic/100758-ozcruize-mega-cruise-2006/
Share on other sites

  • 1 month later...

hey guys..confirmed people that im bringing (well actualy i asked a a mate to ask his mates)

a 2001 magna on 18" chromes and dropped with mass bass

a 2005 wrx sti

a vx ss

a vs wit 10 G's on bass

a Nissan silvia S13 with custom wide body kit

a riced up CRX

a Holden Commodore VT SS with 320 kw's at the rears

and finaly a Nissan skyline R33 M spec

Well what a day today was, everything turned out perfect, weather was 100%, cops where 100% and turn out was 110%

We met at Stamford Hotel at 12pm, Jun from Hot 4's was taking photo's and the MegaCruize will have a full 2-3 page write up in issue #138 of Hot 4's in 3 months time.

All up we counted over 207 cars which was an outstanding attendance number and the biggest OzCruize has ever had in History. Cruise started at 12pm and finished around 7pm Cranbourne Bunnings, all up was close to 200km.

We went through Rowville, Lyndhurst, Dromana, Arthur's Seat, Red Hill, Cape Shank, Rosebud, Mornington and then finally to cranbourne!

Everyone was well behaved and big thanks to the Police for having a blind eye for all the defectable vehicles!

Anyway I would like to personally thank everyone that attended the cruise today, thank you for being on a excellent behavior and hope that everyone enjoyed themselves!

Hope to see you on the next event..

pics and soon to be vids http://www.ozcruize.com/forum/topic.asp?TOPIC_ID=1958

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...