Jump to content
SAU Community

Recommended Posts

1:24 Scale Model - Nismo R34 GTR

Start off with a standard R34 Skyline GTR, then change front and rear bumpers, side skirts, hood, wing, brakes, engine mods, strut brace, steering wheel, shifter, seats, and wheels. All the parts you need to turn the standard car into a full on Drift Tuner are supplied. Then set up the suspension. You can adjust camber, offset and of course you can lower the car to a ride height that suits you.

Scale:

1:24

post-23718-1137065138.jpg

PRICING:

$65 inc. delivery charge (Items will need to be paid for in advance)

COLOUR:

Silver – (MS-042403B-SIL)

Blue – (MS-042403B-BLU)

Gunmetal – (MS-042403B-GRY)

White – (MS-042403B-WHT)

DELIVERY INFO:

Items can be sent out anywhere in Australia through Australia post with full insurance.

HOW TO ORDER:

1) Register at www.autospeedbits.com.au

2) Add the item into your shopping cart and specify the colour you want. Please state “SAU special”.

3) Follow the payment instruction.

4) Orders will be place every Friday 1:00pm.

Link to comment
https://www.sau.com.au/forums/topic/101674-skyline-r34-gtr-124-scale-model/
Share on other sites

These look very nice...I have ordered 1 but, was wondering if you would do a better price if I was to order 3?

2 x GTR R34 (White & Blue)

1 x Mazda RX7

Let me know.....order number 930 I think.

Thanks.

PM send

Andrew

will you be getting any more stock ??? and if so could you get a black one ???

The manufacturer only makes the R34 GTR 1:24 scale model with white, blue, grey or silver.

And if you are getting more stock, would the BNR32 GTR be an option?

At this stage, there is no indication from the manufacturer to make R32 GTR scale model with changeable parts.



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...