Jump to content
SAU Community

Recommended Posts

Hey fellow wagoneers,

i was just wondering where can i get &/or how can i make a dataloging cable, & where can i get the software to use on my lappy for my S2 stagea?

Just wondering cause i used to have one for my commondore & found it heaps of help, especially when diagnosing faults or working out accelleration.

Any help would be appreciated.

Regards,

Jeff

Link to comment
https://www.sau.com.au/forums/topic/101932-datalogger-software/
Share on other sites

exactly what do you need logged?

I use a HKS Camp, and it logs up to 400 minutes worth of driving on a 2mb card. Basically logs all the readings the ECU puts out like throttle, speed, a/f ratio etc.

exactly what do you need logged?

I use a HKS Camp, and it logs up to 400 minutes worth of driving on a 2mb card. Basically logs all the readings the ECU puts out like throttle, speed, a/f ratio etc.

You get a cable from http://www.plmsdevelopments.com/consult_if.shtml - but don't bother with the datascan software as it isn't very good. Mine (with real time charting, ability to replay logs, etc etc) is being tested now, should be read in another fortnight...

It can save anything coming out of the engine, for as big a hard disk as you have on your laptop (ie longer than you could drive on a tank of fuel..) :-)

It will be on www.iqconsult.net

Ian

I won't mind testing it out for you. An objective view could be good for your software & if it's as good as you say it is, I'll do a write up of my experiance & send it to you so you can stick it on your website as a testamony . I'll make up a cable in the next few weeks & give it a go.

I won't mind testing it out for you. An objective view could be good for your software & if it's as good as you say it is, I'll do a write up of my experiance & send it to you so you can stick it on your website as a testamony . I'll make up a cable in the next few weeks & give it a go.

If you want to test your cable, download the demo's that are already on my site. So far they have worked with both serial and usb (with serial adapter) cables.

Should be more demo's up there soon.

Ian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
    • I _think_ that one has a christmas tree or some other retainer spike into a hole in that panel under it. Come in under it with thin scredrivers and just pry it gently up. If you rip the ears off the retainer pin....so what? Just stick it back down after with a bit of race tape and carry on with life.
    • Here's a pic of the damn thing
×
×
  • Create New...