Jump to content
SAU Community

Odometer


Recommended Posts

  • 2 years later...

Sorry to dig up an old thread but this happened to my R33 today. Odometer (including trip meter) stopped working, stuck on 89,XXXkms now..

Any opinions on whether it's better to repair or replace? I think I might just get it repaired so I can keep the genuine (or not so genuine.. as the case may be) kms. If it stops working is that a definite sign of tamperage.. kinda dissapointed cause I thought my k's were genuine (judging from condition of car). How does the R33's odometer work? I think i saw in this thread or another that it's electric?

I'm tempted to leave it cause I hate watching the K's get closer to 100k but a) I dont want to be dodgy and B) prolly already done 100k lol..

Also, I'm in Northern NSW.. only place close I've found that might fix it is in grafton so may as well go up the coast.. Gavin Woods you reckon?

Link to comment
https://www.sau.com.au/forums/topic/10266-odometer/page/2/#findComment-1714417
Share on other sites

cogs, take the dash out, just a few screws, then there are 3 plugs behind the dash which you can unplug and then take the plastic cover off the dash and get like a little needle or something and give the last digit which is km a push along like so that it shows the number, and then plug the 3 things back into the back and take the car for a drive just to see if the odometer starts working again which it should. if not ss automotive sells the cluster, they are alot cheaper then just jap from memory.

Link to comment
https://www.sau.com.au/forums/topic/10266-odometer/page/2/#findComment-1721232
Share on other sites

ive taken my cluster out about 6 times in the last 2 months.... i've given up now... everytime i take it out.. i play with the cogs and it starts working again (sometimes just taking it out makes it start working).

Once it stops its screwed i'd say...it will just keep randomly stopping / starting..

Just buy a used one and hope it also doesnt stop i guess..

thats what im gonna do

Link to comment
https://www.sau.com.au/forums/topic/10266-odometer/page/2/#findComment-1721481
Share on other sites

  • 2 weeks later...

I had a similar problem... if you take the odometer assembly out, look for the white connector. My problem was a loose connection there. I ran the car for a while with the instrument cluster apart, if i applied pressure to the the white connector the odometer would tick over, if i took my finger off it would stop. Have a look there....

Link to comment
https://www.sau.com.au/forums/topic/10266-odometer/page/2/#findComment-1756127
Share on other sites

  • 4 weeks later...

Anyone who bought recently from a yard and has a dodgy odometer should take it back and:

1. Get it fixed

2. Get the timing belt changed by them (as you cannot be sure of how many kms the car has done).

I had the same thing from day one, odometer would start and stop. Got the seller to do the belts at 68,000kms (supposedly).

I have now added another 100,000kms and changed the timing belt myself since.

Anyhow... be aware that if your odometer is iffy, then you should do the timing belt as soon as possible (for the price of doing this it is great insurance that your engine will not go bang).

El Bee

Link to comment
https://www.sau.com.au/forums/topic/10266-odometer/page/2/#findComment-1823159
Share on other sites

Dam, all these 93 model cars with 50-60 thousand K's on the clock is funny. My car has close to 150,000Km on the clock and its a 96 Series 2. I reckon its fair to say that they are pretty original, but you never know.

Link to comment
https://www.sau.com.au/forums/topic/10266-odometer/page/2/#findComment-1823536
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...