Jump to content
SAU Community

R33 GTS-t Cold Air Box Template

Jay95R33

By Jay95R33,
in Engines & Forced Induction

 Share

Recommended Posts

Jay95R33 Grand Master

Jay95R33

Posted
Posted

Well, miracles do happen, and in this case I finally got off my back side and made up a template for my cold air box.

All the pics, templates and instructions can be found here:

http://hyperwa.com/sau/cai/

Any comments all welcome as I'm sure there are a few things I've left out that a few people might pick up on.

And if anyone has any input into the instructions please let me know and I'll add or modify them.

Thanks

Jayson

:burnout: :burnout:

Link to comment
https://www.sau.com.au/forums/topic/1031-r33-gts-t-cold-air-box-template/
Share on other sites
dojobi Experienced

dojobi

Posted
Posted

BTW, I haven't studied it too carefully yet (no time at the moment), but where is your cold air feed. You aren't using the old intercooler pipe as you've got a stock one, right?

When I make this up, I'll use the old pipe as the cold air pipe, but I'm just curious how yours is set up.

Cheers,

Michael

Jay95R33 Grand Master

Jay95R33

Posted
  • Author
Posted

Mine sucks air from around the headlight, but as well as that I've cut a 80-90mm hole in the inner guard (there's a few pics of it on the web site) just to make sure it get's enough air.

Using the stock hole where the intercooler pipe was would be perfect. Just make sure it breaths OK and the hole is big enough.

J

Jay95R33 Grand Master

Jay95R33

Posted
  • Author
Posted

LOL - yepp, the site should be up for a while yet....

If anyone isn't confident on making one I can cut one and post them off. But as the metal has cost me some $$$, I'll have to ask for some money for the metal, my time, and postage.

But I'd say anyone would be able to make it using that template, the hardest part would be installing it. Just really fiddly more than anything.

J

adam 32 Grand Master

adam 32

Posted
Posted

so as for feeding the cold air into the enclosure

youve got a hole into the wheel arch and a hole in the engine bay where the intercooler pipe goes??

im worried about the box gtting enough air but also that the air it gets isnt full of dirt/moisture eg kicked off the wheel or sucked up too low to the ground....

any suggestions as to how to 'feed' the air into the enclosure?

otherwise good work with the template, im having to modify slightly for an R32 but will keep the cardboard thing if you wonah post that on your site as a reference for all us 32 guys!!

Jay95R33 Grand Master

Jay95R33

Posted
  • Author
Posted

Adam 32,

Have a good look at the pics on my site, you see that I've still got both intercooler pipes in place and how the filter breathes.

The filter breathes through the front of the box (hasn't got a front on it) from around the headlight. And then I put a hole into the inner guard just incase.

If you haven't got a black plastic inner guard around your wheel then you might get some crap come up to the hole.

I've got my plastic guard in place and I've been running the box and filter like that for about 9 months and the filter is still almost like new (I check it every 5000km when I do an oil change).

J

adam 32 Grand Master

adam 32

Posted
Posted

i did a partition yesterday, worked really well. after a big freeway run i felt the filter and its dead cold!! so thanks for the ideas, i duno about performance increases but i guess it may get better as i up the boost, its gotah be doing something!

just have to find a way to make the aluminium more reflective rather than absorbant cos it gets bloody hot after a while!

  • 8 months later...
  • 1 year later...
Jay95R33 Grand Master

Jay95R33

Posted
  • Author
Posted

Sorry guys, looks like that address isn't hosting the templates anymore :P

I've zipped the pics and instructions up into three zip files, just download them and extract them all.

When you print the templates, just make sure you print them in full A4 size so you keep the original size.

Cheers

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      V37 Suspension change

      By Duncan · Posted

      You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
    • GTSBoy
      R34 manual conversion speed signal wire finding, need help

      By GTSBoy · Posted

      Yes. Autos typically work from the speed sensor on the pinion shaft of the diff. I also think that even if you have a proper speed sensor for the bog manual in the manual box, that the signal it outputs is not compatible with the auto dash anyway. You should consult that manual (the book, not the gearbox).
    • GTSBoy
      First time Skyline owner

      By GTSBoy · Posted

      And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
×
×
  • Create New...