Jump to content
SAU Community

Recommended Posts

morning all.

i spent some time on sunday making a cold air induction for the cressida, utilising a chaser head light so that i could have a cold air scoop but also have lighting on that side of the car. at the last SC meet i had major problems with intake temps of 72 degree cel, as my air filter sits in the only location i have room for it in my grandpa designed engine bay, so i am looking to get some cooler air into it.

upon reading my sport compact rule book it says must run complete headlight. i asked around at the last round in sydney, and i got mixed interpretations of the rule.

one frame of mind was as long as there was lighting on that side of the car it was ok.

the other was, if you dont have the glass and bulbs in all areas of the headlight that it came from the factory its not a complete headlight.

i know i spoke to paul about this and another guy in our class who had a bulb and also an air duct in the headlight, and i think if there is lighting it should be ok.

has anyone got any ideas on this rule or have they spoken to ohalleron about it?

any thoughts would be appreciated.

Shane.

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/
Share on other sites

well cow girls.

after a lack of banter on the topic i emailed jason ohallaren.

the complete headlight is defined as complete

ie full glass, bulb in full working order as it is from the factory. so for all point scoring rounds cars in S/RWD must have a complete functioning head light.

screws up my plans for my cold air, but i will find a way.

Shane

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1918533
Share on other sites

well cow girls.

after a lack of banter on the topic i emailed jason ohallaren.

the complete headlight is defined as complete

ie full glass, bulb in full working order as it is from the factory. so for all point scoring rounds cars in S/RWD must have a complete functioning head light.

screws up my plans for my cold air, but i will find a way.

Shane

Jason is right

Rule no. SR 7.6

Complete headlight and taillight assemblies mandatory; must be operative.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1920725
Share on other sites

Do S/RWD rules allow you to disable factory fitted power steer?

Rule SR 3.2 Must retain full, original OEM steering gear.

I have only tried disabling power steer once at the track...it was no real benefit other than giving my forearms a good workout.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1920765
Share on other sites

Who knows...but my p/steer is staying

Bit confused here, why are you worried about S/RWD rules allowing you to disable factory fitted power steer then?

you planning on stripping the car when you race, I wouldn't worry about it my 10.5 was done with a fullweight car + some due to surge tank, big single turbo etc

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1921811
Share on other sites

Bit confused here, why are you worried about S/RWD rules allowing you to disable factory fitted power steer then?

you planning on stripping the car when you race, I wouldn't worry about it my 10.5 was done with a fullweight car + some due to surge tank, big single turbo etc

I'm not planning on it...if I go to the drags again, I will run in the same trim as I have always done.

* Full weight, including all trim, spare wheel, tools and jack

* Street Tyres

* Full exhaust (a quiet one at that)

* Stock Airbox

* At least 3/4 tank fuel

Link to comment
https://www.sau.com.au/forums/topic/103819-srwd-rules/#findComment-1921843
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...