Jump to content
SAU Community

Recommended Posts

Cheers, yeah Im real glad I saw the add from Satanic maybe 5mins afterhe posted them for sale. LOL

Pretty sure I will have the rubber taken off, 1 rim repaired from gutter rash, and then head to our business's powdercoaters for a gunmetal grey powdercoat finish, I think.

Then save for new tyres, so it wont happen too quickly (my wife just got robbed today) due to cash constraints, but thats neither here nor there I guess.

Robbed? She alright?

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Robbed? She alright?

Cheers, yeah a bit shaken.

Long story......

Plus baby got 3 needles today so hes CRYING away, and she's in the Stag, but thats now at the Drs 'cause she doent know how to start it properly, and her mobile keeps discharging & she cant put it into the car charger correctly

Geez..... sometimes it doesnt pay to get out of bed! :)

OK.

Got the wheels on the way... yay!

BUT - how will the 17's go in terms of the speedo & gearbox?

To those that upgraded from 16's to 17's, is there a noticable change to your speedo calibration?

Ta, Brendan

OK.

Got the wheels on the way... yay!

BUT - how will the 17's go in terms of the speedo & gearbox?

To those that upgraded from 16's to 17's, is there a noticable change to your speedo calibration?

Ta, Brendan

Hi Brendan,

Not so much the wheels, more the tyres and the overall diameter or rolling distance.

Check this link scroll right down to "A tyre size calculator" pump in the standard size and the new rim size and your new tyre size ad see what the difference is. You can work out what tyre size will get you the closest but there is also some variation in different brands of tyres that you may need to account for (they don't measure correctly)

Hope that is of some help.

Cheers

Luke

Hope that is of some help.

Cheers

Luke

Thanks heaps Luke

appreciated - thats a huge help.... so at 60kms on the speedo, I'll be going 1.88% faster than shown, ie 61kmsph

going from 225/50/16 to 235/45/17

Edited by Tangles
Thanks heaps Luke

appreciated - thats a huge help.... so at 60kms on the speedo, I'll be going 1.88% faster than show, ie 61kmsph

No worries,

So your gearing will be fractionally higher with the new wheels, it is pretty small though!

Luke

NOO.

STOP THE PRESS. DO NOT PAY ATTENTION TO THAT!

From my Jap placard, the stock tyres should be 205/60/15. I spent AGGESS looking for the right tyre in all rim sizes, and when i got my GTT rims i went for 225/45/17 which were closest. I also went for inaccuracies which caused my speed to be a TAD lower then my speedo because then I know i am safe.

All in all, based on GPS speed readings at 100km/h (accurate) my speedo is only off by 3km/h, meaning the speedo is reading 103km/h. Which is perfect

Single most helpful website - http://www.1010tires.com/TireSizeCalculator.asp

Also, Luke, what is going on with your car, when do you want the wheels shipped?

Also, Luke, what is going on with your car, when do you want the wheels shipped?

Nice pick up Alex!

Yes, you must work from the tyre placaed and not what tyres happen to be on the 16" rims at the time, you might be out before you sart! Now how does that effect you Brendan?

Nice link too!

Car should land in Brissy on the 29th of this month mate, was just thinking about the wheels and how long you have been holding them... Maybe anthoer week then we should be right to go, I'd just hate them to get lost in the workshop due to arriving too early! Let me know if that is cool?

Cheers

Luke

Stags come with 15's, 16's and in the case of RS260's 17's, so...... not sure about all this.

Mine had 16's as standard.

Either way I'll make sure when driving that I'll work to roughly a 4% margin for error

Yeh luke thats fine.

Brendan look on your placard to find out what the stock tyre was (The jap one, not the one the compliance shop made up)

I think nissan would have used 15/16 inch tyres which would be the same, saves money over the long term. About the autech, well its a new gearbox/ratio anyway, so no engineering there

Stags come with 15's, 16's and in the case of RS260's 17's, so...... not sure about all this.

Mine had 16's as standard.

Either way I'll make sure when driving that I'll work to roughly a 4% margin for error

the series 2 rs four s comes with 17's standard :)

Yes, but that is irrelevant here as the S2 is the same as an R34 GTT which also came with 17's ..

Not quite, as the 17inch wheels (standard) on my R34 GTX Turbo (which I think had better wheels than the standard GTT) were the 8inch wide (AVS) ones. Where as the wheels on my 2001 RS 4 S (standard) are 17 inch but 7.5 inches wide... :D

(Yep, been looking at the wheels.. :)

I reckon they are perfect. Handling well, not too hard a ride, cheaper tyres, can get replacements if you write them off, great wheels overall!

The Ventus K104 tyres also have a road damage warranty. If any damage comes to the tyre from normal use, they'll repair or replace free of charge in the first 12 months. I found the Hankook K104s to be an excellent tyre and actually had reason to use the warranty twice in the first 12 months - ran over a plank on the road that was covered in nails and hit a fallen tree branch at high speed that put a balloon in the side wall.

I drive my car very hard and I got over 20000ks out of them, most unusual for me! They do get very slippery when they start to get low though.

  • 2 weeks later...

whoo hoo - get my K104's put onto the R34 GTT mags today, and fitted.

will take some happy snaps....... and then in a few weeks time will have the Bilstein suspension installed, along with some of the Whiteline goodies.

its all coming together nicely...... =-)

grrr pics now!

patience young Padawan, patience.

I will use all my powers of the force and produce some pics tonight, in the meantime I simply must continue practising crushing peoples Trachea's with my mind (Darth Vader style) :P

:laugh:

Tangles

Edited by Tangles

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...