Jump to content
SAU Community

Recommended Posts

Hi all, hoping some of you guys can answer a few questions for me.

Firstly, has anyone found a reputable source for bodykits for 4 door R32 GTS-T's? Specifically Vertex style kits?

Secondly, has anyone tryed to fit R33 GTR factory wheels to their 4 door? I know the wheels physically fit, but I would like to confirm how much work in terms of guard flaring/rolling would be realistically required to accomodate these wheels on the 4 door - assuming the car is lowered 1.5-2 inches all around.

Thirdly, R32 GTR rear seats in a 4 door - possible or impossible?

Cheers,

Nick :rofl:

Link to comment
https://www.sau.com.au/forums/topic/103997-calling-4-door-r32-owners/
Share on other sites

"Secondly, has anyone tryed to fit R33 GTR factory wheels to their 4 door? I know the wheels physically fit, but I would like to confirm how much work in terms of guard flaring/rolling would be realistically required to accomodate these wheels on the 4 door - assuming the car is lowered 1.5-2 inches all around."

Ive got s15 rims on my car and its fairly low no probs with scrub biggest tyres I run are 225's

Hi all, hoping some of you guys can answer a few questions for me.

No worries Blitzeh :P

Firstly, has anyone found a reputable source for bodykits for 4 door R32 GTS-T's? Specifically Vertex style kits?

Try G-Force in syd, Avi Prasad is the bloke's name who runs it I think. He's on this forum, and I think he was looking at becoming a sponsor, dunno how he went with it. His website is http://www.jap.com.au in any case. The kits fit pretty well from the ones I've seen, and his prices are pretty damn good. The website has the coupe kit listed only, but I remember him mentioning the 4 door kit was in development last year, so it might be ready now.
Secondly, has anyone tryed to fit R33 GTR factory wheels to their 4 door? I know the wheels physically fit, but I would like to confirm how much work in terms of guard flaring/rolling would be realistically required to accomodate these wheels on the 4 door - assuming the car is lowered 1.5-2 inches all around.

Roll and flare of guards required in the front, might be able to get away with a roll only in the back. 4 Doors look tougher with flares all around anyways.
Thirdly, R32 GTR rear seats in a 4 door - possible or impossible?

Possible, I've seen a few cars with em done... however the mounting positions don't line up exactly the same, some customising is required, and shutting the door is a little harder.
Hi all, hoping some of you guys can answer a few questions for me.

Firstly, has anyone found a reputable source for bodykits for 4 door R32 GTS-T's? Specifically Vertex style kits?

Secondly, has anyone tryed to fit R33 GTR factory wheels to their 4 door? I know the wheels physically fit, but I would like to confirm how much work in terms of guard flaring/rolling would be realistically required to accomodate these wheels on the 4 door - assuming the car is lowered 1.5-2 inches all around.

Thirdly, R32 GTR rear seats in a 4 door - possible or impossible?

All possible... A group called Panteraftermarket (www.pantheraftermarket.com) do Vertex bodykits for 4 doors. Or Adrenalin Autosports as well, located in Sydney and Queensland respectively.

R33 GTR wheels will fit. Depending on your ride height, you might have to roll the guards, namely the rears. I had too.

And I also have an R32 GTR seat in my car... fit like a glove.

p.s Are you stalking me?? haha :rofl:

Here's Panther...

Panther Aftermarket

www.pantheraftermarket.com

HEAD OFFICE

Unit 8 Industrial units

Crescent Head Road

KEMPSEY

PH: 02)6562-2556

FAX: 02)6562-2556

EMAIL: [email protected]

Bank Details for Direct Deposit

ACC Name: Panther Aftermarket

BSB: 032-580

ACC:146589

I'll have to get back to you with Adrenalin.

what are the offsets of R33 gtr rims?

ive got 18x9 +30 on the back of mine and they fit without any modifications. and my car is quite low... can just see the top of the tyre under the guard.

are the leather gts-t seats different to other gts-t and gtr seats? cos i tried puttin my mates leather seats in my car (cos mine where out and people needed to be driven places) and the backrest was too short

how do u roll the rears when theres no real guard to roll? theres like 2cm of panel that goers around the wheel

I had it done from group in richmond, just normal guard rolling machine. $50 a corner. It's not all the way round, they just rolled where the tyre would sit and a small surrounding area.

  • 2 weeks later...

Heres an update for you all.

I have fitted R33 GTR wheels without a problem, mind you the car isnt lowered as yet, however the wheels have advan 225's which are undersized for these rims on a GTR, but work well for this application.

GTST: I had R32 GTR wheels on the car previously and noticed a bit of rub on turn, but havent as yet with the 33 GTR wheels - odd.

For some reason im really keen on the 4 door now and its my new project - so the hunt for parts continues!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all, It's been a bit since I have been able to update.  I pulled the fuel pump, first off it was a "universal" pump and the strainer was very clogged, and it was folded over on itself.  I replaced the fuel pump and all is well....  No more stalling.
    • That's convinced me I'll bump up the G30-660 to 770   Any idea if the difference in boost pressure? Cheers
    • When: Saturday 24th of May 2025 - All day Where: Sydney Dragway, Eastern Creek Cost: Varies - Book direct with the GTR Festival Website We will be there on the day with a stand please reach out via our interest form if you wish to help out with the stand. Limited parking will be available in the display area, first in first served with current members getting priority, please register your interest with the link above also. Please post any great photos you take on the day on this thread and we will try use some in our e-mails/website/social media
    • Hey guys so turns out this project is going to be much bigger than I thought haha but I've done some my homework and have done a few panels on my car, but one part I can just not visualise is this. If I do a spot repair and I put filler in a dent for example and sand outside of the repair with 320 grit lets say so the primer can stick as I will only put primer on that repair and the surrounding area and then repaint the whole panel. Don't I need to make sure that I don't put primer on the old clear coat? I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down, it's still shiny. I thought putting paint on clearcoat or primer on clearcoat is a bad idea because it won't stick. So in this scenario it's a bit different to mine but imagine someone doing a spot repair and only painting that small section of repair but the new paint is landing on the old clearcoat. What am I missing?
    • I was immediately reminded that your location is QLD. Sounds like a perfect SEQ business idea.
×
×
  • Create New...