Jump to content
SAU Community

Recommended Posts

TURBO KIT

TRUST T88 34D Turbo kit with TRUST TYPE C wastegate to suit RB26

Front and rear housing freshly polilshed and ceramic coated respectivly

Braided oil feed Line made to suit RB26/30 combo

Dump pipe made to suit r33 gtst

Price: $4000

PRICE CHANGE $3700

FUEL KIT

HKS fuel rail to suit RB26

1000cc BLITZ injectors

SARD fuel regulator

Surge Tank

Twin Bosch 500hp pumps

Twin Billet Filters

Twin 10mm Aluminium lines

(all fittings from surge to pump to filters to rail)

whole setup has not seen 1000kms

Price: $2500

PRICE CHANGE $2300

Edited by nv033
Link to comment
https://www.sau.com.au/forums/topic/104447-complete-800hp-combo/
Share on other sites

  • 2 weeks later...
Any pics of the T88??

Why is a dump for a GTSt part of an RB26/30 package??

I'm interested in the T88 kit but not in the dump pipe.

Because the above kit went into a GTST.... The turbo in the pic has since been polished (still in wrapping) and rear housing coated

119-1912_IMG.jpg

118-1874_IMG.jpg

119-1908_IMG.jpg

119-1911_IMG.jpg

how much power can this make on a gtr motor with step 1 cams,basic mods, and 20psi boost..

can be 50rwkw off .. can this make over 400?

with the above specs it should see very close to 400rwkw above or below i cant answer because there are too many variables :) however this turbo is certainly capable of making over 400rwkw....500rwkw is more its cup of tea

to get a feel of it with the 3L @ 16psi with minimal timing it saw 370rwkw ;)

Edited by nv033

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...