Jump to content
SAU Community

Recommended Posts

Were you at that Powerplay Track day at Eastern Creek last year?  Actually that pic looks like it was taken there.

If so I remember your car.  It's very nice.  I'd keep the car and forget about the R34.

yes i was there, that was a awsome day

it was my first time on a race track and the first time the gtr showed its true colours the handling was unbelievable

what car were you in ?

Giorgio,

when are you coming by to show us the ute? :P

hahaha

Tosh

wont be long, im getting my turbo fixed the exhaust wheel snaped off the shaft

its a long story but GCG are coming to the party

ouch! and so soon after it was finished!

you can tell me the story next time you're around :P

do you know if terry sold the NUR yet

i love that car,wish i could afford it

My opinion on the matter is to sell sell sell and get that R34 GTR. Although this may be a somewhat rare car, I think you could have problems in the future finding the few people who value the car way it "should" be valued. I've seen 34 GTRs for around the high 50 mark imported through J-Spec etc, so you could pretty much hop out of your current car and into the 34 GTR :O

I was in the white 4 door R34.

The only difference between the two is that the LM has no rear wiper.  :)

It also has a carbon fiber rear wing,no rear speakers,different air ducts on the front bar, no rear wiper,and i think its a little lower,a small lip on the front of the bonet to help get more air in the grill.

B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...