Jump to content
SAU Community

White Face Dials R32,r32(1)r33(2)r34


Recommended Posts

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

Great news!!!

Is there any chance you can send my first/ASAP?

I'll shout you a beer when you come down to Gold Coast later this year.

I just finish reinstalling the air conditioner system back on the car and left a few parts out waiting for your white face dial so I don't have to rip them off again.

Pleeeeeeeeeeeeeeeeeeeeeeeaaaaaaaaaaaassssssssssseeeeeeee :P

:P 9krpm, i will send them all off together bro... ill get some stuff to send them in tomoro afternoon, and ill send them off on friday.. thats the best i can do mate. Hope thats ok!

paulr33, I have never even seen that sort of set up on a skyline! I know it looks like the S2 R33 but what does those lights mean?

Im sure they would make them, but im sorry to say the time has expired for this deal... Maybe if i get a few people interested i will do it again, Sorry mate!

kezza

Great news!!!

Is there any chance you can send my first/ASAP?

I'll shout you a beer when you come down to Gold Coast later this year.

I just finish reinstalling the air conditioner system back on the car and left a few parts out waiting for your white face dial so I don't have to rip them off again.

Pleeeeeeeeeeeeeeeeeeeeeeeaaaaaaaaaaaassssssssssseeeeeeee :thumbsup:

OI! If anything ladies first! lol

kidding kezz, whenever is good!

thanks kezza

BTW how much did you pay for your big blue leds for the speedo? I checked autobarn, the small one are cheap but the large one for the dash are way too much for a led.

thanks kezza

BTW how much did you pay for your big blue leds for the speedo? I checked autobarn, the small one are cheap but the large one for the dash are way too much for a led.

well im unsure dude, cause i made my led lighting b4 they even started to bring out pre fabed ones!

if you want the numbers to stay as bright, i would keep the original ones in, and add a blue led on each side of the needle post.

leds are one way, so you have to find the + side of each track that runs around the light fixture, when you look at the back of the dials were the plugs plug in and the lights screw into you will see off one of the plug tracks (ILL+) follow this track to find the +side of the lights you want to change,

The only problem i had with making my own is that the viewing angle of the les are narrow, and you have to point the led derectly at the plactic glass light catches around the dials!

I think the pre made ones have a better viewing angle of the leds so you wouldnt need to have them directly pointing. but hey it only cost me $5 to make one in total!

Like i said b4 i can make them up if people need them, i build them with resistors. but not with diod tho,

so as long as you can see the + side of the plugs they will work, if you dont and they will blow.

hit me up if anyone needs them, i knocked off a heap of light fixtures from the scrappers.,lol

Got my dial faces today woohoo :)

Now, it looks obvious that they have to be cut out, around the border is easy, but what is the easiest way to cut out all the holes, for needles, screws ect?

Ill give you a tip, dont cut the centre circles out fully, they are larger than the dial cover things.

Good on me for finding that out!

yay for you!

wanna come over and do mine?? lol

Ok, done them now.

there was some issues with the needle of the rev catching, but that was fixed. For the pins that the needles sit on, cut the holes large otherwise the paper sits up and the needle rubs.

On another note, they are good during the day, but I NEED new globes as the dash is damn dim. Also have to adjust it a little bit as the numbers underneath dont 100% line up, which is needed.

All in all, result is good, but still some issues.

Cheers Kez

Sounds like it's quite fiddly then, gonna wait till mum gets me some scalpels from work :(

I was actually thinkin bout how big the holes should be cut out, so it's the centre holes for the needles that have to be cut a bit smaller?

What about the rest of the holes, same size as what's printed?

Forgot to thank you, cheers kezza

Edited by beastien

A scalpel will be no good IMO. I did the first 2 holes with scalpels and they came out very...."sided"

I them starting using those scissors women use for the skin that covers your nails, they cut it off? Cuticles? They were great. Sharp, precise.

I need to find some brighter bulbs now.

Unfortunatly, the cyberstrok stuff 95% lines up with the lights underneath. For example, in the revs, the 5 is perfect, so is the 0, but the 2 and 3 are off by 1-2mm.... hmmm. I will see when i get brighter bulbs. Might get around to that this weekend?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...