Jump to content
SAU Community

White Face Dials R32,r32(1)r33(2)r34


Recommended Posts

I used a souldering iron to burn the holes. It's a lot easier.

It would be a lot quicker and nicer if these come precutted.

Overall looks very nice but too much time and effort.

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

hello,

i was wondering on when the next group buy for this is????

what one are you after? I'll sell you mine as I'm selling my car anyhow and I can't be bothered to install them.

I have a white one with green numbers...$100 only if you are keen

what one are you after? I'll sell you mine as I'm selling my car anyhow and I can't be bothered to install them.

I have a white one with green numbers...$100 only if you are keen

pics???

hahahahaha, LIZZZZZZ... why are you selling the car?

Thanks guys for all the feed back! If i get enough interest for them ill do it again.

You can get them pre cut for a bit more money, but its not that hard to cut out dials. lmao

hahahahaha, LIZZZZZZ... why are you selling the car?

Thanks guys for all the feed back! If i get enough interest for them ill do it again.

You can get them pre cut for a bit more money, but its not that hard to cut out dials. lmao

still not 100%on the selling, but time for bigger and better things!

i don't thing they'll fit a 32, but if it's for a 33 pm me your email address and I'll get them too you

hahaha,,, really, will it turn out pink will it.... hmmmm...

and answer is no i am not a girl.

if it wer to turn out pink how would i fix that???

  • 2 weeks later...
hahahahaha, LIZZZZZZ... why are you selling the car?

Thanks guys for all the feed back! If i get enough interest for them ill do it again.

You can get them pre cut for a bit more money, but its not that hard to cut out dials. lmao

Kezza,

lets start up another group buy, I have had a couple of them on otherforums, nothing but positive feedback!!

HOOK IT UP KEZ!!!

i need to get at least 5 people to want to get some b4 i can make an order.. after group buy has been made it only takes a week or two to get them in your hands.

i will start another thread and see how much interest is showen..

thanks,kezza

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...