Jump to content
SAU Community

Recommended Posts

theres going to be new speed limits enforced in SA .. apparently as of 1st of march ... where ever there is no sign for 60 ... the limit will be 50 which means lots of suburban areas ... dont' u all think this is a load of bull sh*t?? this is just an inconvenience to people ... and a big revenue raiser for the idiots in government!!

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/
Share on other sites

Agreed, but to tell the truth, when they did this in WA, it didn't really make much difference to travel time etc - just a real PITA trying to remeber to slow down - 'sides I can see 2 good things coming from this

1) I wont have to be constantly changing between 3rd and 4th every time someone slows 5 kays then speeds up again, and

2) Less likely to damage my car (or my kidneys) on the very ordinary roads that exist on smaller streets.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-170566
Share on other sites

I'm surprised it took as long as it did to bring SA into line with the rest of the country. Most of (if not all?) the other states have had 50km/h suburban limits for quite a while now.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171299
Share on other sites

on small suburban roads i don't think i even get near 50km/hr ... it will be just like speed cameras ... not saving any more lives ... just making more money ... and then when they start using speed cameras in spots where people are going 60 in a 50 zone in their own suburb and start getting fines ... then people will start complaining ...

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171332
Share on other sites

I don't agree with the 50km/h policy, & I have no doubt it's more about revenue than road safety, but I'm still surprised it took as long as it did for SA to adopt the 50k limit.

I think we all know that reduced speed limits are a win-win situation for the government. They "appear" to be serious about road safety by reducing speed limits & running big ad campaigns & the like. Then they sit back & reap the $$$ from fines revenue. It's a small outlay for a HUGE return & all the while they look like road safety is their primary concern ;)

If road safety "really" were the issue here speed cameras would be on blackspots not dead straight open stretches of road. Driver education, advanced driver training/courses & tougher licensing would be of major importance. And finally, ad campaigns would be aimed @ increasing awareness of basic road rules that are important to improved traffic flow (like "KEEP F#@KING LEFT UNLESS OVERTAKING!!!!).

sm_soapbox.gif

Rant over.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171406
Share on other sites

KEEP LEFT UNLESS OVERTAKING - is my #1 pet hate for other road users. Signs are posted every 2km or so along the freeway, yet people are so blind/ignorant/ arrogant to take notice. Getting stuck behind a KC laser doing 100 while next to a semi doing the same speed is frustrating.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171461
Share on other sites

Perhaps someone should point out to the bean counters the revenue they are missing by not enforcing this rule.

Seems to me that most people are responsible with speed and will only drive to the conditions, an occasional person drives a bit silly - but so many other people have to get picked up for going a few kays over the limit before the idiot driver gets done - and chances are the fine wont slow down the idiot driver.

NB when I say idiot driver, i am talking about irresponsible dicks who like speeding in dangerous places, eg heavy traffic, near schools and small suburban roads etc.

Govt 1, public 0. Its a shame the revenue doesnt go back into roads and driver education.

Hey, this rant thing aint too bad, eh whatsisname...lol

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-171500
Share on other sites

I guess we have to pay for these assylum seekers somehow..

Freakn Govt.

IMO 60 isn't too fast. Running red lights and doing 60 in school zones appears to be a bigger problem.... 50kay's is still gonna clean up the kid at the school crossing and no doubt kill him but.

Some accidents are unavoidable, but i dont think lowering the speed will fix up these problems. Maybe a bit more common sense on the drivers behalf would improve the problem.

There's a time and place for speeding......excessily..AIR, Mallala and the express way, Not in the street. But there's no way that 60 is too fast.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-172269
Share on other sites

Originally posted by TIMMMAYYY

Maybe a bit more common sense on the driver’s behalf would improve the problem

Yep, that's exactly what's needed. As I posted above, on-going driver ed programs, compulsory advanced driver training, much tougher licensing systems (as per the bike system), ad campaigns covering a wide range of road issues, improvement of roads, the list can go on…….

The reality is though, these things all COST the government money rather than making more $$$. Faaar easier to reduce the speed limits, fine the hell out of everyone & then manipulate the statistics to show the measures they’ve taken are working.

I posted some figures a while back that showed the number of speed cameras in SA, revenue raised & the fatality rate over a 10 or so yr period. No surprise to see stuff all reduction in fatality rates, 500% increase in revenue & tenfold the number of cameras in action. (These fig’s might be a tad out but ya’ get the idea).

I might run for local parliament – Independent candidate “ Anti Speed Camera Party” My one & only policy - The total removal of speed cameras within the yr :D

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-172491
Share on other sites

50km!!!:thumbdwn:

Signs should read -

Keep left unless overtaking - & if a Skyline,EVO, or any turbo car

is behind you pull over to the side of the road & get the bloody hell out of the way.

Hmmm. might not fit too well.

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-172845
Share on other sites

Cool! So the Anti Speed Camera Party would get a few votes then. Thanks guys :D

Gotta' love it, not more than a day after my ranting about fine revenue & the media cotton onto the $800per HOUR that SA speed cameras are making to fill state coffers!

800 F@#KING DOLLARS, PER HOUR, 365days a yr!

Now in reponse to this the transport minister (or some other weasel) has stated "It's all up to the driver, don't use the right foot so heavily & you won't have a problem. "The choice is in the drivers hands (or foot)" Yep ok, fair call I say.

However, while it's up to us as drivers to decide what speed we travel, when do we get a say on what speed limits are set & where!?

I can see this state ending up the same as NSW, speed limits reduced well below what's really needed. Areas that were once 100km/h dropped to 80km/h. 80 zones down to 60 & so on & so on....

Just so you guys don't think I'm some kind of speed crazed fool, I completely agree with low speed limits for built up areas, schools etc... nothing faster than 150km/h in these areas :D

Erica,

That's the funniest thing I've read for a while :lol:

Link to comment
https://www.sau.com.au/forums/topic/10592-new-speed-limits/#findComment-174601
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...