Jump to content
SAU Community

Stupid R34 Shocks

Booya
 Share

Recommended Posts

Booya Enthusiast

Booya

Posted
Posted

Was at the Mechanics yesterday trying to get the Rear shocks replaced and they couldnt get the part as the shocks are the same ones used on the R34 GTR.

It has the Square end instead of the round hole thingy.

Was a annoid that i wasted a whole day trying to get this fixed. Dammit!

Then he said he could get Koni's $500 for the pair and then 160 for fitting! God dam!

Link to comment
https://www.sau.com.au/forums/topic/105960-stupid-r34-shocks/
Share on other sites
kralster Veteran

kralster

Posted
Posted

Hmm well i got 4 new shocks for my R34 and i had to get nissan ones cos it was a warrenty job and they managed to get geniune nissan ones from melbourne for 250 each. I was going to get adjustable koni's for about 210 each or so but couldn't cos as i said it was a warrenty job.

Also they are different to an GTR but you are correct in that they are not an eye hole.

Sydneykid Grand Master

Sydneykid

Posted
Posted
Was at the Mechanics yesterday trying to get the Rear shocks replaced and they couldnt get the part as the shocks are the same ones used on the R34 GTR.

It has the Square end instead of the round hole thingy.

Was a annoid that i wasted a whole day trying to get this fixed. Dammit!

Then he said he could get Koni's $500 for the pair and then 160 for fitting! God dam!

Konis are good shocks, I use them on lots of cars. But Konis and Skylines are not a good match. Do a search for details.

:P cheers :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • JC71
      gtr hood match gt/gtt front fenders?

      By JC71 · Posted

      would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...