Jump to content
SAU Community

1994 Nissan R33 Skyline Gts-25t

slayer_1971
 Share

Recommended Posts

slayer_1971 Proficient

slayer_1971

Posted
Posted

Well guys after over 6 years ownership its time to move on...well actually move up to a GTR

I bought this car in Nov 1999....basically the car rolled off the ship and I bought it on the same day which makes me the 1st Aust. owner. It had 52058 Kms on the speedo when I bought it and now its showing 103000Kms (50000Ks in 6 years isn't too bad).

I've looked after this car the best I could...never been thrashed...R31Nismoid can vouch for me here but I'm not a hard driving person...its always been garaged and serviced every 6 months regardless of kilometers (timing belt was changed at 80000) and car was serviced last week. I also have all the service history/receipts while I’ve owned it.

So here are the specs:

Model = Skyline R33 GTSt (Series 1)

Transmission = 5 Speed

Colour = Dark Gray

Rego = Expires Dec 2006

VIN = 6T9IMPV97X2BD6049

Location = Melbourne (Nth Suburbs)

Modifications:

* GTR Rear Spolier

* R34 Gtt Intercooler

* Pineapples (courtesy of Dr Drift)

* K&N Pod Filter

* HKS SuperDrager Exhaust

(also comes with standard exhaust from dump pipe back)

* High Flow Cat

* Turbo Timer

* Bosh Fuel Pump

* 10 Disk CD stacker in boot (standard Stereo)...new speakers

and thats it

This is a really nice car to drive...both interior and exterior are in a very good condition

Link to Pics:

http://users.tpg.com.au/adsla0xk/index.html

Asking Price: $15500.00

Contact: via PM

Email: [email protected]

Mobile: 0401607150

thankyou

Rowan

Link to comment
https://www.sau.com.au/forums/topic/106411-1994-nissan-r33-skyline-gts-25t/
Share on other sites
OLDS Community Regular

OLDS

Posted
Posted
Well guys after over 6 years ownership its time to move on...well actually move up to a GTR

I bought this car in Nov 1999....basically the car rolled off the ship and I bought it on the same day which makes me the 1st Aust. owner.  It had 52058 Kms on the speedo when I bought it and now its showing 103000Kms (50000Ks in 6 years isn't too bad).

I've looked after this car the best I could...never been thrashed...R31Nismoid can vouch for me here but I'm not a hard driving person...its always been garaged and serviced every 6 months regardless of kilometers (timing belt was changed at 80000) and car was serviced last week.  I also have all the service history/receipts while I’ve owned it.

So here are the specs:

Model  = Skyline R33 GTSt (Series 1)

Transmission = 5 Speed

Colour  = Dark Gray

Rego  = Expires Dec 2006

VIN  = 6T9IMPV97X2BD6049

Location                = Melbourne (Nth Suburbs)

Modifications:

*  GTR Rear Spolier

*  R34 Gtt Intercooler

*  Pineapples (courtesy of Dr Drift)

*  K&N Pod Filter

*  HKS SuperDrager Exhaust

          (also comes with standard exhaust from dump pipe back)

*  High Flow Cat

*  Turbo Timer

*  Bosh Fuel Pump

*  10 Disk CD stacker in boot (standard Stereo)...new speakers

and thats it

This is a really nice car to drive...both interior and exterior are in a very good condition

Link to Pics:

http://users.tpg.com.au/adsla0xk/index.html

Asking Price: $15750.00

Contact: via PM

Email:  [email protected]

Mobile:  0401607150

thankyou

Rowan

...any pics of the inside would really help the buyers assessment.

Thanks

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      New Skyline will be RWD and manual

      By PranK · Posted

    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • DraftySquash
      Newbie from VIC

      By DraftySquash · Posted

      Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
    • Kinkstaah
      Nismo GT Pro LSD configurations

      By Kinkstaah · Posted

      Yea, that is what I was getting at in my ramblings too. The nismo one actually is a 1.5 way and a 1 way. They don't do a *2* way because a true *2* way would have equal ramp angles. Or is that a true 1.5 way? Realistically I think a "1.5 way" does not actually exist. A diff can either lock in two directions or one. It also doesn't help that a LOT of people in Australia speak about 1.5 way diffs are referring to their 1 way diff.
    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
×
×
  • Create New...