Jump to content
SAU Community

Recommended Posts

so the idea of the holes is

to allow some air to bypass the compressor inlet/snout and enter directly into the compressor housing ?

As you can see from the picture of my turbo below, the holes (some turbos have slots) allow the air to enter further out on the compressor blades. This is an attempt to avoid the compressor surge problem that occurs when you have a large turbo on an engine that won't take the airflow at mid to low rpm's.

:) Cheers :P

without

i think it comes on about 3300 with nos and full at 4300 or so

when i get the ecu back

ill post two dyno sheets

one without nos and one with to compare

i have just finished reading this thread, and oh my, how fun it was... everyone seems to be in the same rb25 frame of mind, where it can only push 300 odd rwkws max.. kudos to you mate, your doing exactly what id be doing if i had a dyno on hand 24/7.... see you at the track.

i have just finished reading this thread, and oh my, how fun it was... everyone seems to be in the same rb25 frame of mind, where it can only push 300 odd rwkws max.. kudos to you mate, your doing exactly what id be doing if i had a dyno on hand 24/7.... see you at the track.

thanks mate

and ill see you there in 2 months

i have just finished reading this thread, and oh my, how fun it was... everyone seems to be in the same rb25 frame of mind, where it can only push 300 odd rwkws max.. kudos to you mate, your doing exactly what id be doing if i had a dyno on hand 24/7.... see you at the track.

Was the motor that you just blew up stock?

  • 2 weeks later...

Just got my 2 speed box ordered

and stall converter

should be in next week

will post new dyno graph

and be going to the track to see how much quicker it will go

Video clips havent been uploaded but will be soon when i got time

  • 3 weeks later...
Guest Rotary20B
Hello

I am new to this forum site.I would like to know what is the highest HP at the Rear Wheels produced by an Rb25 motor.

I currently have a GTST skyline and with the standard Rb25 motor and pumping out 498 Hp on 18 PSI.It is a manual skyline.I am running a Standard Motor,GT3540 turbo,Custom plenium,750cc Injectors,Hydra Computer,125 mm thick cooler with HKS style end tanks,3 " intercooler pipes, 3 "exhaust,Aftermarket coil packs.The engine has been run on the dyno about 150 times checking things and testing as i am trying to prove what the standard rb25 motor is capable of.

I am wanting to see who has made more hp.A dyno sheet is available and the dyno is on my own Dyno Dynamics Dyno running shootout mode.Intake Temps on the dyno sheet are 34 degrees and the room temp is 30 degrees.

Thanks

PS this is on Opitimax fuel.

I remember a customer of MazFix's did a comparison on shootout modes on the Dyno Dynamics dynos and it ads 25% more power over normal mode which would equal 373.5 hp on normal mode.

I remember a customer of MazFix's did a comparison on shootout modes on the Dyno Dynamics dynos and it ads 25% more power over normal mode which would equal 373.5 hp on normal mode.

Interesting

but if you read off the dyno dynamics site

it states that it locks all variables in place not allowing them to be changed

the only way you get more hp out of shootout mode is putting your exhaust sensor near the Extractor manifold.Which is picked up then on the CORRECTIONS part of the dyno sheet.As well as tempertures of the day,Barametric pressure and Humidity.

If the dyno doesnt have shootout mode the variables such as ramp rates can be changed to suit different vehicles.

So i can say that your quote is wrong

373.5 hp doesnt = 130MPH

Yep Engine just got dynod

Made a total of 1231 HP

i was buying this for my Full chassis car but chose to use it in my STREET car

Don't kid yourself fool, you have no Full chasis car and your STREET car isn't registered or even driven to the strip and runs no exhaust, stop kidding yourself we're not idiots

Your lies don't impress anyone they just make you look like a DONKEY

Edited by Shibby
Don't kid yourself fool, you have no Full chasis car and your STREET car isn't registered or even driven to the strip and runs no exhaust, stop kidding yourself we're not idiots

Your lies don't impress anyone they just make you look like a DONKEY

and your STREET car isn't registered or even driven to the strip and runs no exhaust, stop kidding yourself we're not idiots

what makes you think its not rego`d

reason why it isnt drivin to the strip is that im from wollongong and if i break something it wil cost to much to get it back

As for the exhaust its dumped at the diff

and what makes you think i dont have a full chassis car im building

Edited by MR331307
Because your a DONKEY, its like your FULLY built spare RB25 that you post about but now your selling the stocker you post you can build it

Pretty easy to do a search and realise you don't remember your own lies from post to post

ive got the parts sitting there all ready

if you got such a big mouth and think you know everything come down to my shop and come check it out for yourself

or when i come back to the track

no need for silly remarks when you dont know me from a bar of soap

you might read this and that but i can assure you im using the standard motor and my other motor is ready for building machined and ready.

as for the race motor i have got it purchased and am awaiting arrival from it

it was assembled and dyno`d from another shop overseas

so many people on this forum can talk so much bad stuff about someone its not funny

to the people who have supported this thread thank you

to people who talk bad about the car and dont believe it

like i have stated the car is 80 % of the time at Wild 1 motorsport

go and view it

everyone is more then welcome

Edited by MR331307
ahhahahahhaahhahahahaha

yes i better anounce this

i borrowed my mates plates SCRMER

my plates are LNEMUP

im building his car

it has a Trust t88

Forged pistons,rods,crank,jun pump,Larger oil sump,GTR head,LARGE CAMS,custom cooler,Hydra ECU,1000cc injectors.

will be ready in 2 weeks

As for the rego why else would you need to borrow your mates plates? did you forget you posted that :):)

what your saying WAS true

but i was waiting on my engineers report before i could get the new Blue slip,Its rego`d now

all i gotta say is

later man

Before i go

shibby what car do you drive

Edited by MR331307
I ride a donkey

just asking

mate no need for silly remarks

See i wish to sponser or advertise on SAU

but people like you make me change my mind and lose interest

sometimes i think is it worth it to contribute and talk on these forums

they are well respected and alot of people use them for the right reasons i started off on the wrong foot but have learned to hold remarks in

Edited by MR331307
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...