Jump to content
SAU Community

Recommended Posts

Hello people, I’m a forum newbie and also a fresh skyline owner.

I have a few problems that I need to get fixed with my steering that I don’t trust doing myself, so I’m after a good mechanic? (I don’t have all the money in the world though willing to pay good if the quality is there)

I live on Brisbane Southside and own a 1988 Nissan Skyline R31 GXE, I’ve noticed that the steering is a little heavy along with some actionable pull to the left or right while driving straight. I suspect there is a some play in the joints around the wheel and also hear a clunk (Some where around the lower mounting of the front left shock) when hitting speed bumps.

Any Suggestions or recommendations with be muchly appreciated!?

Link to comment
https://www.sau.com.au/forums/topic/107550-after-a-southside-steering-mechanic/
Share on other sites

My Dad is a mechanic with about 30 years experience, and has a home-based workshop, and he's a wheels/tyres/suspension expert. He did heaps of work on my R33 so isn't afraid of newer stuff either, and is about as honest/ethical as you're likely to find :whoops:

Cosmos Mechanical

(07) 3281 6575

Mention Skylines Australia and that Marc sent you :)

Related note: Skylines Australia Qld has sponsors including workshops, a tyre store, brake specialists etc, and conducts events that will allow you to enjoy your car to its potential. Details in the Queensland subforum on these boards :(

/shameless plug

We are not allowed to say bad things about workshops for fear of banning so I won't say this.....but whatever you do, don't take your car to Charlies! There you go, you've been warned.

Marc's dad sounds like the way to go. Marc is an honest bloke so I would assume his dad is twice as honest at least.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...