Jump to content
SAU Community

Newbie Questions

Booya

By Booya,
in Western Australia

 Share

Recommended Posts

Booya Enthusiast

Booya

Posted
Posted (edited)

Well got lots of question about incresing HP in my R34.

It came with

Blitz FMIC and blow off valve,

POD,

SAFC II

Stainless Steel exhaust Cat Back.

Car is Tiptronic Auto

Im thinking about ordering a boost controller from mark Williams $35 buks.

Not sure how to fit it either.

Any ideas on where to get my car dynoed and tuned in Perth, a good place? wanna get the SAFC II tuned properly.

Also any ideas guys on what to to improve power from here?

Edited by Booya
Link to comment
https://www.sau.com.au/forums/topic/108296-newbie-questions/
Share on other sites
Miller the hoon Rising Star

Miller the hoon

Posted
Posted (edited)

35 manual boost controler are good cause you only need to set boost ebc u need to set everything but once you can use your ebc they are far better

i guess that the people who recon there manual one works better never had there ebc set properly

i have an e boost 2 and when i got it

it was set incorrectly and was worse than my bleed valve

now i can use it i have eliminated my boost spick and now run higher boost cause i have no spick and no ecu shut down

ebc is the best mod iv got and with a good 1 you take it from car to car

my 2 cents champ and mind the spelling

james

Edited by Miller the hoon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      first time swapping rb25det into r34

      By Murray_Calavera · Posted

      This sounds like a perfect excuse to install a Haltech R3.
    • Kinkstaah
      first time swapping rb25det into r34

      By Kinkstaah · Posted

      I do believe from context he is talking about a S0/S1 R33 RB25 with associated ECU and Wiring for that, and a manual gearbox into a R34 N/A Auto. I don't have the knowledge of all the pinouts and such but my gut feeling from doing my own conversion is to use as much of the R33 stuff that you can. The "car" wiring is quite seperate from the "Engine" wiring when all things are considered. The only things to truly consider 99% of the time is the cluster, reverse lights and potentially disabling the 'not in P/N' immobilizer circuit.
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • GTSBoy
      first time swapping rb25det into r34

      By GTSBoy · Posted

      Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • WR33KD
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By WR33KD · Posted

      I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
×
×
  • Create New...