Jump to content
SAU Community

Recommended Posts

I have an R33 gtst with about 175rwkw. Currently have:

Stock springs all round

Rear shocks: New KYB gas - no adjustment

Front shocks: originals, can hear them clanking round a bit, got told when I put new boots on them that they were very worn

Tyres - Michelin Premacy 16" 205/55 on stock rims

Considering getting either Bilstein or KYB fronts.

KYB - $244 for 2

Bilstein - about $495

Just wondering if the Bilsteins will make much of a diff if only on the front...just wondering about people opinions who have replaced their tired suspension with KYB close to stockers and others that have done the same with bilsteins .

Do good standard shocks handle 230rwkw if in case I upgrade turbo in the future?

Car grips well in straight line but put the boot in at about 3000rpm round a corner in 2nd and it spins up pretty easy - but I guess it will always do that..

Car will only see track day once ot twice a year and definately don't want a firmer ride than I've got..

Cheers

Edited by benl1981

Thanks Ben - Might order them and wack them in

I find if the surface is a bit uneven etc and you put the boot in the rears spin pretty easy - sort of bounce a bit then get traction. I don't think bilsteins in the rear would help that would they? Much better than the old shocks though.

So you just have standard KYB gas shocks al round Ben?

Do good standard shocks handle 230rwkw if in case I upgrade turbo in the future?

Cheers

no they won't, anything over 200kw and you''ll have to get forged internals, Lumpy cam, hks wastegate

and big mac strut tops.

I was running bilstein shocks in the rear and standard in the front for some time with standard springs and the car drove beautifully.

Pay the extra and get the Bilsteins you won't regret it.

Refer here:

http://www.skylinesaustralia.com/forums/in...showtopic=85467

Sure :D

I have new KYBs in the rear which feel pretty good. Just want to complete the front so I know it is all good.

One of mine on the rear didn't rebound at all - you push the shock shaft in and it wouldn't come back out ehhhehe

Yeah maybe my friends has siezed !! Geee

hey mate,

I have kyb struts in my car, and some unknown jap springs that were in the car when it got here.

They are really good, especially with the springs. My mate has hks coilovers and allround his supension isnt mych stiffer than mine.

I think for a daily driver it makes a quite smart choice

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...