Jump to content
SAU Community

Recommended Posts

Yeah i want a TV already got an lcd monitor.

I want to use HDMI cos then i can use the optical output on the TV to go straight into my amp and use only on imput on the amp. Instead of like 3, ie ps3, xbox360 and wii.

Plus i won't use the hi-fi for the sound all the time as dad dosen't want me using up his valves to play games. Not when they cost a few hundred bucks each and there is quite a few of them.

If you want I'll put a list of TVs in here with prices I can get them for you at so you have a good idea on what to shop around or even take them off me, I get them at wholesale price anyway.

Ok cool,

even just some ones that you would recommend.

One of my clients runs a electronics store so i can get most brands of LCD's at a good price, i'm currently looking at a samsung they look pretty good.

So what do you think about 1080p should i hold off for it or just get one that does 1080i?

Ok cool,

even just some ones that you would recommend.

One of my clients runs a electronics store so i can get most brands of LCD's at a good price, i'm currently looking at a samsung they look pretty good.

So what do you think about 1080p should i hold off for it or just get one that does 1080i?

for XBOX and watching sport. go the 1080p. its better for motion at hi res. Samsung and Panasonic both near same quality, Panasonic edges out with fantastic contrast ratios and marginally better image quality.

I just put my 3D card up for sale if anyone is interested. :spank:

http://www.skylinesaustralia.com/forums/in...howtopic=143697

MSI 7950GX2 1Gb of DDR3 ("Faaaaaaast!")

Edited by SAZilla

What if you got an open space lounge, want to play during the day and there too much light to run a projector (expecting "tough!" back lol).

Plus, LCD 32 inch panasonic TV cost just as much as projector anyway, and you can watch it all day without eyes hurting.

u buy a cheap plasma that sits behind my drop down screen for everday stuff plus prog these day have lots more brightness and my contrast is amazing just a tip. Make for a awesome saterday night invite friends over to your cinema ;)

key word "night". Any projector isnt viewable during the day unless you got blinds, you got a plasma behind the white screen thats a smart move.

Id look at buying a plasma too mate for your Xbox360, or PS3. They have jumped down in price too and most are very good.

Edited by SAZilla

at the moment I can only offer you the:

LG 32" Wide 8ms LCD

1366 X 768 @ 60Hz, DVI, Black

which is going for $2000 i reckon, around there, I can get it to you for $1670.

Ive heard of a Panasonic LCD 32 inch with HDMI, but I havent got access to it yet. Only 40 inch LCDs and plasmas from panasonic and greater.

Edited by SAZilla

yep im on pirie st. mate, i think most everyone in this section of the forum is in adelaide or outskirts. youve been registered since 2004 u should know!

Edited by SAZilla

# Panel

- Size(") : 32" Wide TFT LCD Screen

- Resolution : 1366 x 768 (WXGA)

- Pixel Pitch (mm) : 0.510(H) × 0.510(V) mm

- Brightness : 500 cd/m2

- Contrast Ratio : 1600:1

- Viewing Angle : 178/178 (Horizontal/Vertial)

- Response Time (ms) : 8ms

- Display colors : 16.7M Colours

# Display

- Horizontal Frequency : 30 ~ 83 KHz

- Vertical Frequency : 56 ~ 85 Hz

- Input Signal : Analog Signal, Digital signal (HDMI)

# Dimension (W*H*D) : 803 x 493 x 99.9 mm Set / 917 x 704 x 332 mm Box

# Weight : 16 Kg Set / 26 Kg Box

# Special Features : SRS-WOW speaker, HDMI, RS-232C

That LCD TV that I just listed has HDMI.

ha!. LG L3200TFK is the monitor i listed above, see what you think, most people give it the ultra-thumbs up. in the end its your descision where you get it from and etc. I seen this monitor in stores for 2400 in some places, i say help out the SAU and offer it to people at 1670 lol. if anyone is interested PM me. Also as i mentioned above if your looking for a gun 3dcard look in selling section.

can vouch for that 3d card its the BOMB

any ways whats you thoughts on the grundig LCD tv SAZilla

we got 1 and i think its very good picture

we only run foxtel digital with it and i dont think it came with HDMI

Vision II 32

EDIT just noticed the grundig does a HDMI via DVI-D optional cable required

Edited by Madaz

that TV is fine for foxtel man, Maybe with a not so good aerial setup the digital tv (local) wont look that great, but for Fox it should be fine.

The only thing i hate about LCD TVs is that a good one needs to be 8ms and below response time and the contrast ratio needs to be same or better than 800:1. Plasma TV Contrast ratio is like 10,000:1.

But nah man, that TV looks nice and certainly looks like it would do the job without confusion.

Well i am posting this off of my new Sony KDL-32V2000

And it is absolutely amazing, i cannot believe how damn good it is.

Perfect as a monitor (just need wireless mouse and keyboard now) XBOX360 is just out of this world.

I cannot wait for ps3 using HDMi.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...