Jump to content
SAU Community

Recommended Posts

I have no idea if they would 'really' last longer than -R's considering a -R Verbatim or +R Verbatim but on paper they are superior. Verbatim both rate their -R and +R's to approx 100years.

Have a read of their Whitepapers.

Wiki has a little on it.

There are a number of significant technical differences between the dash (or often, incorrectly called "minus") format and the plus format, though most consumers would not notice the difference.

One example is the ADIP system of tracking and speed control being less susceptible to interference and error than the LPP system used by DVD-R, which makes the ADIP system more accurate at higher speeds.

Also DVD+R(W) has a more robust error management system than DVD-R(W), allowing for more accurate burning to media independent of the quality of the media.

Additional session linking methods are quite a bit more accurate with DVD+R(W) versus DVD-R(W), resulting in fewer damaged or unusable discs due to buffer under-run and multi-session disks with fewer PI/PO errors

EDIT: Bl4ck32 found Verbatim DVD+R 16x 50spindle at Kmart for $32

I decided to try and find a little more info rather than just come to my conclusion by reading whitepapers.

Found this........ http://www.cdfreaks.com/reviews/Why-DVDRW-...-to-DVD-RW.html

and this http://adterrasperaspera.com/blog/2006/10/...archival-media/

Says basically the same thing.

and this may be of interest.

The DVD-R specification states that for every 192 bits, 48 of them are not protected under any scheme, 24 of them are protected by 24 bits of parity, and the last 56 bits are protected by another 24 bits of parity. This weird (to put it mildly) scheme allows you to easily scramble or lose 25% of the data that is required to read your disk!

Either way there's nothing wrong with -R's.. Just that +R's are supposed to be better.

Yer i went to Kmart yesterday to get a 50s pack of dvd+r, and was looking at what they had available...

TDK is a brand i always favoured, but @ $51 fer 50 discs i thought bugger that...

Looked over and they had the Vertabim 16x DVD+R for $32, so thats where my choice went.

Ive had dodgy $2 shop type discs give to me before to use, and the gold was flaking off within 6 months...

Ive got vertabims here from back when i had my pentium 100 and they are still readable

Theres nothing wrong with my Princo cds that I used back in the day. They have no scratches and read all my family photos fine, I used one to retrieve some old photos last night. If you dont store them properly and leave them on spindles all the time of course its gonna happen.

These are the best DVDs you can buy... (Most durable IMO)

TDK Durable

Best media ive rated. besides of course - Verbatim - which is Taiyo Yuden.

Having fun with Varbatim's Lightscribe discs, anyone seen or used them before?

Paul,

Those scratch proof's look good.

Do they make then in printable?

-----

Princo,

Not all buggered up but just a few, the most important ones. :S

3-4years ago I used to buy the 10packs with case. They were all stored correctly.

If you are backing up important stuff you generally dont need printable media IMO. I dont print fancy things on my pictures cds. But when I burn DVD-Rs (Verbatim) i do. And I use the Lightscribe CD-Rs because its f**king fantastic how you can put the whole cd song list on the front of the CD and make perfect CD front labels using your laser on ur writer and the writers are like 60 bucks! (A DVD writer with lighscribe functiuon).

http://www.skylinesaustralia.com/forums/in...howtopic=155038

hey, if you have a spare 56mb and wanna see a first-time BF2 video I made, have a look ^^.

quality of footage is bad (compressed it twice) but next vid I make will be awesome. music is pretty cool tho, made it for my war vet Gpa who passed on the weekend (made it thurs-sun when he was dying).

nice frags man little poor quality but you allready mentioned that good skills

nice frags man little poor quality but you allready mentioned that good skills

cheers madaz - and thank you for those tips in the games thread, best info Ive receieved so ta to you matey :dry:

lol, skills have improved somewhat since the dark&bitter startup days...... but I'll forever be a Tangles :D

If you are backing up important stuff you generally dont need printable media IMO

I prefer a nice tidy small description of whats on the cd with a date. Nice and simple.

I haven't bothered with lightscribe as I have a printer (Canon Pixma MP780) that is capable of printing on CD's + my burner doesn't support it as I bought this one (LG 4167) just as lightscribe was released.

hey guys, do any of you know or have a cheap Lcd lying round (15 to 17') trying to clean up my desk top and get rid of my crt.....

cheers guys

any help always appreciated....

Pete

theres allways this its a used monitor with 30days warranty $176 its a LG so there reliable

http://www.itestate.com.au/products_detail...code=PD00004423

my mate bought a laptop from ITestate and has been happy with there service

Edited by Madaz

Out of curiosity.,....

Whats the smallest hard drive you have bought and what did it set you back?

20mb Seagate SCSI Hard Drive for my old Amiga 500, back then it was worth ~$600!!!!!!!!

http://www.amiga-hardware.com/showhardware.cgi?HARDID=534

I used to kick some arse in the awesome Test Drive, then Test Drive 2 and then I believe it was Test Drive the Dual. Not to forget Shadow Warrior, Golden Axe, Double Dragon and Shadow of the Beast!! Awseome some of those old games.

Shadow of the beast I used to get my hairs standing up on the back of my neck for some reason.

I remember I used to have hundreds of games back then. Box upon box of disks.

A bit like the Commodore 64 before that with its tapes and then 3/4" floppy's.

I might load up UAE and get in to some double dragon. lol

EDIT: Can't forget Barbarian with its round house head chopping. :P

scr_barbarian.jpg

goldenaxekscrm05.jpg

amiga-shadowofthebeast.jpg

I hope no ones on dialup. :S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The price of every automatic S2 stagea in japan has suddenly doubled
    • thanks mate, one of the reasons I even bought it to be fair.
    • I found parts on EFI Solutions webshop that seemed to be the accurate ones. I haven't gotten around to fitting the turbos back on the car yet since I still have to deal with the shitty crack in the engine block. But I'm confident that the bolts I ordered will fit. According to EFI they are also 7-16/24. The reason M11x1 got involved here is because it is apparently very similar to 7-16/24.
    • Well, to be fair to the car I've driven it daily for almost a decade now, although in that time only put on 50k, as it just recently passed 100k miles early this year. For the most part its been fine because I've been able to source parts from AUS like jacks jdm and a few places in Japan, some things like pads have been easy since 300z pads swap right in... I realize its probably at that time in its life i should find a new DD (but I rent and only have so much space, no garage) so new cars just complicate things. As it is older though, I recognize its about that time as with my '67 GTO to maybe side step and find an alternative, but if i can keep driving it... I want to.   That said, I may just look into a local shop that might be able to, problem is the mechanic I work with has limited space as a mom and pop operation, and he's a busy busy man, so id need to find out if he can keep the car in the meantime, which may or may not be practical for him. Maybe I'll just buy one off jacks jdm and get that refurbed /shrug.. just looking at options and what others may have to offer for advice on the matter. Like I said, its hard finding people around here who actually have one, I've had mine 9 and a half years and I've met 3 others, and they are all military, one was oem from 95 with 30k miles (rip that car... guy got hit after someone crossed s double yellow, totaled it)
    • I've noticed my rear springs sag a bit compared to the fronts. I have stock springs and KYB struts. The front wheels are pretty consistent in their ride height, but compared to the front wheels, one of the rears sits 20mm lower, and the other 40mm lower. This negatively affects the ground clearance, and also angles the headlights up. What are some some economical options for new springs? Or information like good spring rates, lengths  in order to find a suitable replacement etc Far from lowering the car, I'd prefer to raise it a bit to keep it ground clearance friendly.
×
×
  • Create New...