Jump to content
SAU Community

Recommended Posts

I have no idea if they would 'really' last longer than -R's considering a -R Verbatim or +R Verbatim but on paper they are superior. Verbatim both rate their -R and +R's to approx 100years.

Have a read of their Whitepapers.

Wiki has a little on it.

There are a number of significant technical differences between the dash (or often, incorrectly called "minus") format and the plus format, though most consumers would not notice the difference.

One example is the ADIP system of tracking and speed control being less susceptible to interference and error than the LPP system used by DVD-R, which makes the ADIP system more accurate at higher speeds.

Also DVD+R(W) has a more robust error management system than DVD-R(W), allowing for more accurate burning to media independent of the quality of the media.

Additional session linking methods are quite a bit more accurate with DVD+R(W) versus DVD-R(W), resulting in fewer damaged or unusable discs due to buffer under-run and multi-session disks with fewer PI/PO errors

EDIT: Bl4ck32 found Verbatim DVD+R 16x 50spindle at Kmart for $32

I decided to try and find a little more info rather than just come to my conclusion by reading whitepapers.

Found this........ http://www.cdfreaks.com/reviews/Why-DVDRW-...-to-DVD-RW.html

and this http://adterrasperaspera.com/blog/2006/10/...archival-media/

Says basically the same thing.

and this may be of interest.

The DVD-R specification states that for every 192 bits, 48 of them are not protected under any scheme, 24 of them are protected by 24 bits of parity, and the last 56 bits are protected by another 24 bits of parity. This weird (to put it mildly) scheme allows you to easily scramble or lose 25% of the data that is required to read your disk!

Either way there's nothing wrong with -R's.. Just that +R's are supposed to be better.

Yer i went to Kmart yesterday to get a 50s pack of dvd+r, and was looking at what they had available...

TDK is a brand i always favoured, but @ $51 fer 50 discs i thought bugger that...

Looked over and they had the Vertabim 16x DVD+R for $32, so thats where my choice went.

Ive had dodgy $2 shop type discs give to me before to use, and the gold was flaking off within 6 months...

Ive got vertabims here from back when i had my pentium 100 and they are still readable

Theres nothing wrong with my Princo cds that I used back in the day. They have no scratches and read all my family photos fine, I used one to retrieve some old photos last night. If you dont store them properly and leave them on spindles all the time of course its gonna happen.

These are the best DVDs you can buy... (Most durable IMO)

TDK Durable

Best media ive rated. besides of course - Verbatim - which is Taiyo Yuden.

Having fun with Varbatim's Lightscribe discs, anyone seen or used them before?

Paul,

Those scratch proof's look good.

Do they make then in printable?

-----

Princo,

Not all buggered up but just a few, the most important ones. :S

3-4years ago I used to buy the 10packs with case. They were all stored correctly.

If you are backing up important stuff you generally dont need printable media IMO. I dont print fancy things on my pictures cds. But when I burn DVD-Rs (Verbatim) i do. And I use the Lightscribe CD-Rs because its f**king fantastic how you can put the whole cd song list on the front of the CD and make perfect CD front labels using your laser on ur writer and the writers are like 60 bucks! (A DVD writer with lighscribe functiuon).

http://www.skylinesaustralia.com/forums/in...howtopic=155038

hey, if you have a spare 56mb and wanna see a first-time BF2 video I made, have a look ^^.

quality of footage is bad (compressed it twice) but next vid I make will be awesome. music is pretty cool tho, made it for my war vet Gpa who passed on the weekend (made it thurs-sun when he was dying).

nice frags man little poor quality but you allready mentioned that good skills

nice frags man little poor quality but you allready mentioned that good skills

cheers madaz - and thank you for those tips in the games thread, best info Ive receieved so ta to you matey :dry:

lol, skills have improved somewhat since the dark&bitter startup days...... but I'll forever be a Tangles :D

If you are backing up important stuff you generally dont need printable media IMO

I prefer a nice tidy small description of whats on the cd with a date. Nice and simple.

I haven't bothered with lightscribe as I have a printer (Canon Pixma MP780) that is capable of printing on CD's + my burner doesn't support it as I bought this one (LG 4167) just as lightscribe was released.

hey guys, do any of you know or have a cheap Lcd lying round (15 to 17') trying to clean up my desk top and get rid of my crt.....

cheers guys

any help always appreciated....

Pete

theres allways this its a used monitor with 30days warranty $176 its a LG so there reliable

http://www.itestate.com.au/products_detail...code=PD00004423

my mate bought a laptop from ITestate and has been happy with there service

Edited by Madaz

Out of curiosity.,....

Whats the smallest hard drive you have bought and what did it set you back?

20mb Seagate SCSI Hard Drive for my old Amiga 500, back then it was worth ~$600!!!!!!!!

http://www.amiga-hardware.com/showhardware.cgi?HARDID=534

I used to kick some arse in the awesome Test Drive, then Test Drive 2 and then I believe it was Test Drive the Dual. Not to forget Shadow Warrior, Golden Axe, Double Dragon and Shadow of the Beast!! Awseome some of those old games.

Shadow of the beast I used to get my hairs standing up on the back of my neck for some reason.

I remember I used to have hundreds of games back then. Box upon box of disks.

A bit like the Commodore 64 before that with its tapes and then 3/4" floppy's.

I might load up UAE and get in to some double dragon. lol

EDIT: Can't forget Barbarian with its round house head chopping. :P

scr_barbarian.jpg

goldenaxekscrm05.jpg

amiga-shadowofthebeast.jpg

I hope no ones on dialup. :S

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...