Jump to content
SAU Community

Recommended Posts

I'd question the dealer about that one..... There should be a green plate =under the bonnet somewhere and a silver VIN number affixed to the firewall next to the original japanese VIN number (usually on the lip at the back)

If a car is not complianced then it has been bought in illegally and if caught the Govt has the right to make you crush your car and then send the evidence report to DOTARS.....

Go see the dealer and ask to see the RTA inspection report, Import Approval, and invoice.... they might not show you the invoice but the other one's should be no problem...I hope)

Cheers

Loz

i got vin number but no compliance plate. and i have renewed my rego last year with no problem at all. unfortunately, the dealer i bought the car from has sold their business to other company and although they are still using the same company name, but they are different owner. i tried to call them today but seems they don't want to know anything about this.

If a car is not complianced then it has been bought in illegally and if caught the Govt has the right to make you crush your car and then send the evidence report to DOTARS.....

what a load of rubbish!

Your car could be a rebodied vehice....pm me the vin...i might be able to tell you from that what the story is...i wouldnt panic

could be a test and evaluation vehicle thats the only way.. but after 12 months they must have a compliance plate fitted otherwise big fine. Been through this with a dodgy company already in Vic who somehow wanted to escape their obligation of fitting the compliance plate after 12 months. you wil be able to renew rego but when it comes to selling - good luck... IS it in Vic, otherwise its be done illegally as ylwgtr says.

re bodied cars is ghosting, and that is illegal....

I posted the stuff about DOTARS ..ice 180, Ylwgtr seems to think what i said was crap....:argue:

But it is what i read about when i was researching skyline's before i bought one...

I heard there was a big crack down on imports in Vic due to the company being found out...

I'd get in contact with DOTARS and have a chat to them about the situation and see if they can offer some advice on what to to....

Loz

Originally posted by Lozza150

re bodied cars is ghosting, and that is illegal....

I posted the stuff about DOTARS ..ice 180,  Ylwgtr seems to think what i said was crap....:argue:

But it is what i read about when i was researching skyline's before i bought one...

Loz

Err , not completely true.

Rebodied cars is not ghosting if the damaged vehicle and new body has been presented to the relevant authorities.

It is done with Commodores and Falcons all the time by a company here in W Aust ( Carrera Autos )

It is illegal to remove the chassis number from one car and insert it in another.

equinoz , I wouldn't get too worried , if was bought and lic thru a legit car dealer , there is usually an explanation.

I assume you are talking about your R33 and not some older car right ??

Cheers

Ken

sounds liek complete bullshit in vic it is impossible to get car regoed without compliance plate unless t&e vehicle althoguh with recent events that might not be true. Was it from the country I have heard of some people paying off local staff to look the other way. Not sure how it works in NSW but thought similiar to Vic.

forogt to put it on HTF did he get it regoed then?

A re bodied car would still need the (a) complaince plate... wouldnt it?

to show that it meets australian standards and is legit right.... because the chassis numbers would not match..... that's what's throwing me off here.

I'm unsure whether Imports and Aussie car's come under the same rule... with re bodieing....

Whats the lowdown boyz?

i've checked with RTA today and all my registration is legit, car is registered, nothing wrong, and when i asked him about the missing compliance plate, he said that's fine as long as your car is registered. but i think i need that bloody compliance plate if i want to sell my car right?

SELLING AN IMPORTED VEHICLE

If you have followed the procedures outlined in this brochure and the vehicle has met the requirements for import approval and initial registration, there is no restriction

under the Act preventing the subsequent sale of an imported vehicle unless conditions have been applied to the Approval.

Check with the Registration Authority in your State or Territory for requirements regarding the sale of an imported vehicle. Addresses are at the end of this document. It is an offence to supply to the market (ie to sell for use on a public road) a vehicle that does not meet the ADRs, or is not fitted with a compliance plate, identification plate, used import plate or Personal Import plate and such action may attract a penalty of up 120 penalty points per vehicle. 1 penalty point equals A$ 110 (as at 22/ 1/ 02).

Vehicles 15 years or older shall not be fitted with a compliance plate under the Act. You should consult your State or Territory Registering Authority for registration requirements for these vehicles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
×
×
  • Create New...