Jump to content
SAU Community

compliance plate questions

equinoz

By equinoz,
in General Automotive Discussion

 Share

Recommended Posts

Lozza150 Proficient

Lozza150

Posted
Posted

I'd question the dealer about that one..... There should be a green plate =under the bonnet somewhere and a silver VIN number affixed to the firewall next to the original japanese VIN number (usually on the lip at the back)

If a car is not complianced then it has been bought in illegally and if caught the Govt has the right to make you crush your car and then send the evidence report to DOTARS.....

Go see the dealer and ask to see the RTA inspection report, Import Approval, and invoice.... they might not show you the invoice but the other one's should be no problem...I hope)

Cheers

Loz

equinoz Apprentice

equinoz

Posted
  • Author
Posted

i got vin number but no compliance plate. and i have renewed my rego last year with no problem at all. unfortunately, the dealer i bought the car from has sold their business to other company and although they are still using the same company name, but they are different owner. i tried to call them today but seems they don't want to know anything about this.

Guest ylwgtr

Guest ylwgtr

Posted
Posted

If a car is not complianced then it has been bought in illegally and if caught the Govt has the right to make you crush your car and then send the evidence report to DOTARS.....

what a load of rubbish!

Your car could be a rebodied vehice....pm me the vin...i might be able to tell you from that what the story is...i wouldnt panic

ice180 Mentor

ice180

Posted
Posted

could be a test and evaluation vehicle thats the only way.. but after 12 months they must have a compliance plate fitted otherwise big fine. Been through this with a dodgy company already in Vic who somehow wanted to escape their obligation of fitting the compliance plate after 12 months. you wil be able to renew rego but when it comes to selling - good luck... IS it in Vic, otherwise its be done illegally as ylwgtr says.

Lozza150 Proficient

Lozza150

Posted
Posted

re bodied cars is ghosting, and that is illegal....

I posted the stuff about DOTARS ..ice 180, Ylwgtr seems to think what i said was crap....:argue:

But it is what i read about when i was researching skyline's before i bought one...

I heard there was a big crack down on imports in Vic due to the company being found out...

I'd get in contact with DOTARS and have a chat to them about the situation and see if they can offer some advice on what to to....

Loz

gtrken Grand Master

gtrken

Posted
Posted
Originally posted by Lozza150

re bodied cars is ghosting, and that is illegal....

I posted the stuff about DOTARS ..ice 180,  Ylwgtr seems to think what i said was crap....:argue:

But it is what i read about when i was researching skyline's before i bought one...

Loz

Err , not completely true.

Rebodied cars is not ghosting if the damaged vehicle and new body has been presented to the relevant authorities.

It is done with Commodores and Falcons all the time by a company here in W Aust ( Carrera Autos )

It is illegal to remove the chassis number from one car and insert it in another.

equinoz , I wouldn't get too worried , if was bought and lic thru a legit car dealer , there is usually an explanation.

I assume you are talking about your R33 and not some older car right ??

Cheers

Ken

ice180 Mentor

ice180

Posted
Posted

sounds liek complete bullshit in vic it is impossible to get car regoed without compliance plate unless t&e vehicle althoguh with recent events that might not be true. Was it from the country I have heard of some people paying off local staff to look the other way. Not sure how it works in NSW but thought similiar to Vic.

forogt to put it on HTF did he get it regoed then?

Lozza150 Proficient

Lozza150

Posted
Posted

A re bodied car would still need the (a) complaince plate... wouldnt it?

to show that it meets australian standards and is legit right.... because the chassis numbers would not match..... that's what's throwing me off here.

I'm unsure whether Imports and Aussie car's come under the same rule... with re bodieing....

Whats the lowdown boyz?

equinoz Apprentice

equinoz

Posted
  • Author
Posted

i've checked with RTA today and all my registration is legit, car is registered, nothing wrong, and when i asked him about the missing compliance plate, he said that's fine as long as your car is registered. but i think i need that bloody compliance plate if i want to sell my car right?

ice180 Mentor

ice180

Posted
Posted

SELLING AN IMPORTED VEHICLE

If you have followed the procedures outlined in this brochure and the vehicle has met the requirements for import approval and initial registration, there is no restriction

under the Act preventing the subsequent sale of an imported vehicle unless conditions have been applied to the Approval.

Check with the Registration Authority in your State or Territory for requirements regarding the sale of an imported vehicle. Addresses are at the end of this document. It is an offence to supply to the market (ie to sell for use on a public road) a vehicle that does not meet the ADRs, or is not fitted with a compliance plate, identification plate, used import plate or Personal Import plate and such action may attract a penalty of up 120 penalty points per vehicle. 1 penalty point equals A$ 110 (as at 22/ 1/ 02).

Vehicles 15 years or older shall not be fitted with a compliance plate under the Act. You should consult your State or Territory Registering Authority for registration requirements for these vehicles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Yea that’s why I said ima test them with multimeter and see the reads.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Only at idle. Isn’t a problem when rev it seems.
    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...