Jump to content
SAU Community

Recommended Posts

1998 Er34 GT-T Sedan

2.5 Litre NEO6 Turbo engine

4 Speed tip-tronic auto with steering wheel shift

73,000km’s

LSD

Super HICAS

ABS

Airbags- two in the front and 2x side impact

Traction control

All power options

3.5inch Blitz Nur exhaust (plus silencer)

3inch Turbo dump and front pipe

600hp Hi-Flow CatCo Catalytic converter

Pod filter

600x300x76 front mounted intercooler

Profec A Electronic Boost Controller

Turbo Timer

SAFCII Black (Tuned by Hyperdrive)

Xenon lights with adjustable tilt

After market stereo with MD player (jap one ie shitty radio) and Alpine Type R subwoofer

Serviced every 5000km’s with Mobil 1 and replaced plugs with iridium’s

Power output of 250rwhp @ 10.5psi. Was also tuned richer than most people get to keep it in the green.

Stock exhaust and filter still in garage. But stock IC has been sold. Comes with spare tyres 4x Bridgestone G-Grid IIs with lots of tread left (taken off for compliance).

Now replacing rear bumper...

Cost of ownership...

$901 a year in insurance and im 22 with 60%NCB.

Costs about $60-70 to fill with BP Ultimate and gets between 450-550km's depending on how its driven.

Servicing costs about 70 bucks every 5000 (im sure you can do it every 10 but I wont)

Asking 23k ONO

PM or email... [email protected]

*Added more pics*

post-17793-1142126804.jpg

post-17793-1142126888.jpg

post-17793-1142126909.jpg

post-17793-1142126928.jpg

post-17793-1142126943.jpg

post-17793-1144664239.jpg

post-17793-1144664254.jpg

post-17793-1144664277.jpg

post-17793-1144664294.jpg

post-17793-1144664302.jpg

post-17793-1144664316.jpg

post-17793-1144664334.jpg

post-17793-1144664341.jpg

post-17793-1144664355.jpg

post-17793-1144664381.jpg

post-17793-1144664391.jpg

post-17793-1144664430.jpg

post-17793-1144664468.jpg

post-17793-1144664481.jpg

post-17793-1144667122.jpg

post-17793-1144667167.jpg

Edited by SnRuB
Link to comment
https://www.sau.com.au/forums/topic/109261-r34-gtt-sedan/
Share on other sites

the missus wants that auto :O

I must stay strong for the manual... :ninja: hehe. good luck with the sale.

btw...got pics of that crack in the bumper?

Edited by mickey
Link to comment
https://www.sau.com.au/forums/topic/109261-r34-gtt-sedan/#findComment-2073244
Share on other sites

the missus wants that auto :laugh:

I must stay strong for the manual... :D hehe. good luck with the sale.

btw...got pics of that crack in the bumper?

Yeah i know where you're coming from. Same thing, just 12 months ago :-)

My cameara is stuffed so im in the process of buying a new one. But to describe it.... Its the right rear corner. It went into my other car at about 2km/h and is more warped that it is cracked. A few people said i could repair the crack and get it sprayed but a new kit and spray is only 1k more than getting it back to stock anyway.

Let me know if she wins and you want to talk..

Ben

Link to comment
https://www.sau.com.au/forums/topic/109261-r34-gtt-sedan/#findComment-2073844
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...