Jump to content
SAU Community

Recommended Posts

for sale -

ecr33 1995

91096kms

black - stock bodywork - stock interior - all origional paint

bilstein suspension - lowered slightly.

manual transmission

some nolathane bushes on the front suspension

17" wheels 225 front 255 rear

z32 afm

k&n filter

spitfire coils

nismo fuel pump

powerfc with boost control kit

trust plum back bov

avo frontmount intercooler

6 puck brass clutch

hks 2530 - with hks actuator and hks dump pipe

rsr front pipe - proper 3" cat

momo 3" stainless catback

3" flanges all the way

car has been maintained since purchase by autosport engineering and justjap. service intervals were 5000km. for a while it ran on motul 300v and now its on mobil one. puralator oil filters used.

if ud like to BYO greenslip and rego then let me know and we can adjust the price.

the current state of tune gives 215 kw at 6000rpm - which is where the graph ends

afr is set to 11.5 and the boost on those runs was 15.5 psi

i willl post some pics if ur interested and i have some dyno printouts someplace.

$18000 neg :geek:

Edited by no_name
Link to comment
https://www.sau.com.au/forums/topic/109541-syd-fs-1995-r33-gts25t/
Share on other sites

some addition images for the curious. there are the curreny AFR settings / boost curve and value and the kw output.

the power output of 215 is only at 6000 because these runs were to make sure the AFR was sane and the knock was ok. i didnt want to flog the poor car to death on the dyno.

http://www.flickr.com/photos/12808493@N00/with/114044230/

these are old images and are from before the powerfc integrated boost control kit was used - as u can tell from the boost curve.

there should be 3 images there sofar showing boost / power / afr

lemme know if this link doesnt work,

enjoy

Edited by no_name

At last here are some images of the car itself,

116991420_7878e5b9d8.jpg

116991422_31be7b44a8.jpg

116992091_84db2a87f4.jpg

as you can see its clean and the condition is very good.

for the rest of the images follow the link

http://www.flickr.com/photos/12808493@N00/

Edited by no_name
Nice car bro! Are you willing to seperate parts?

Good luck with the sale!

im not thinking of taking any of the nice parts out at this point. il keeping waiting for the right person who wants the whole nicely integrated package.

thanks for asking,

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...