Jump to content
SAU Community

power fc soon.....!!!!!


Recommended Posts

lixid, how do u expect to tune your powerfc and car effectively if you dont have a dyno? i mean there is always a road tune, but you just have sooo many different variables to look out for - how can you effectively tune a car whilst watching what the taxi in front of you is doing?

I think, spend the money on a decent workshop (i know this is hard to find) and be done with it. Your better off getting it done properly first time and not have to worry about it ever again.

My new ride comes within 8 weeks or so. I can't wait. PowerFC and front mount to go in, 40 and 60kw atw is a fantastic result guys! who did your tuning???

MY_R34GTT.jpg

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23266
Share on other sites

30-40 rwkw is a good gain so you should be happy with that.

dyno is just getting a result. dyno tune is more costly as it can take a while.

i just got mine tuned at bd4's and it cost me around $270. it can be more and it can be less depending on level of tune. i'd say yours will cost more as they will have to start from the begining remaping everything.

and, no a dyno tune is not necessary as the pfc comes with a basic map but i'd advise you get it to make most of the pfc. otherwise what's the point of getting pfc in the first place

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23272
Share on other sites

Guest lixid

ONARUN

my car looks the same as yours....

you got 60!!!!! that's alot man... i wish i can get 30-40kw out of it.

well

i will go to one of my friend's workshop, which i usually go for service and mods.

he doesn't have a dyno stuff. so it's hard to say how much power increase exactly. and i don't know how much rwkw i have now.

where do you guy usually go for dyno. and how much???

and when you people say dyno. do you mean dyno tune. or just get a result.....

is a dyno tune necessory???

by the way, how you guy put the little pic under you name??

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23219
Share on other sites

Originally posted by lixid

where do you guy usually go for dyno. and how much???  

is a dyno tune necessory???

i go to bd4's. just got one done for $270 and that was a light tune.

dyno tune is necessary once you get pfc to get the most out of it. otherwise don't bother with it.

yours will cost more than $270 i think as they'll need to remap most everything whereas mine was just a tweak.

j, as they say, it's plug and play

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23808
Share on other sites

No way Jimbo,,,,,Unless you can get the 2nd hand one to go back to factory defualts. If it keeps it's memory from the last car,,,you'll have to get it tuned to yours. Onarun told me his kept it's memory when his battery went flat and had to change it.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23948
Share on other sites

Oh, sorry, I meant just in terms of installing thats all I'd have to do .... I'd then promptly be taking it to Hills to have it dyno tuned. Just wondering if I'd have to pay them to dyno tune and install, or just the tune ;)

It looks like I'll be able to get one with a hand controller for about $1000, which is a bargain.

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23954
Share on other sites

Jimbo,,,Get Hills to install it,,,,much safer,,,you don't know what settings the last owner had. The Dyno is the be all and end all of a PFC.

Does he have 2,,,,$1000 for the puter and controler is real cheap buddy.

Neil.

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-23971
Share on other sites

Jimbo: thats seriously cheap for a PFC AND controller.Make sure there is nothing wrong with it before you buy it.

Good second PFC's alone are going for significantly more than that.....if its all good then good score mate ;)

I will be getting a Power FC after the next round of exterior mods on my car. woohoo

Link to comment
https://www.sau.com.au/forums/topic/1099-power-fc-soon/#findComment-24042
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm thinking that this is such a small part of the problem that you could easily forego the vac pump and just achieve 90% of what you need, which is keeping the gate open when off boost. It's not as if there are not already techniques to keep a gate fully closed under boost. After all, you have boost. Just use a wastegate actuator that will allow you to apply the boost on the appropriate side, just like every external gate out there.
    • Heres another fitment photo. redrilled the pattern to 5x112, and threw my audi´s rims on. had to touch the upper control arms with grinder, because the "sharp corner" was sticking about 2-3mm on the tire path. i have the "fender lip" mostly cut off, otherwise these (too) would contact with it. 20x9.5 ET25 rear    265/30 20x8.5 ET20 front    255/30 they are temporary, and look too big for the chassis. searching for 19s to it.
    • From experience, it will come back to bite you haha.
    • Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
×
×
  • Create New...